View Single Post
Old May 20, 2012, 04:10 PM   #4
Senior Member
Join Date: July 19, 2010
Posts: 180

That solved the problem. I can see that feature is very different than my 1860 copy. I didn't know that the spring and the pin could be inserted from the exterior of the frame after removing the screw. And no, I didn't lose the spring. When I removed the hammer, the pin came out ( the small rod ), but the spring stayed behind, it didn't go flying off somewhere.
steelbird is offline  
Page generated in 0.08323 seconds with 7 queries