The Firing Line Forums - View Single Post

dunerjeff · May 10, 2012, 06:18 PM

I load a majority on a proggresive, with a check die,and I still look into all cases as I place a bullet.That is just something that should be done.

As to the OP, it does sound like you are starting at too low a charge(as you stated "I couldn't tell between [B]1.7gr[B] and 7gr). Your 1.7gr comment make me think that is what your using as a start load??.

Anyway, when you look at your manual, it will state STARTING load 3.7(just an example) and a max load 4.9. You should be starting at 3.7, not "12% below starting load", which is what I believe you said in one of your posts. I would relook at your charge and what the manual says. Therein lies the issue? yes?? maybe???

Most powders, if not enough(1-2gr) is put in the case(depending on volume) won't "ignite explosively" just smolder,flash, and smoke,(put a spot on the sidewalk and light it,you'll see what I mean.That would mean the primer is all the pressure you'll get to push the bullet. Ironically ,a primer will push a bullet about 1/2" down the barrel, hmmmmmmmm

May 10, 2012, 06:18 PM	#27
dunerjeff Senior Member Join Date: March 31, 2011 Location: central Wisconsin Posts: 440	I load a majority on a proggresive, with a check die,and I still look into all cases as I place a bullet.That is just something that should be done. As to the OP, it does sound like you are starting at too low a charge(as you stated "I couldn't tell between [B]1.7gr[B] and 7gr). Your 1.7gr comment make me think that is what your using as a start load??. Anyway, when you look at your manual, it will state STARTING load 3.7(just an example) and a max load 4.9. You should be starting at 3.7, not "12% below starting load", which is what I believe you said in one of your posts. I would relook at your charge and what the manual says. Therein lies the issue? yes?? maybe??? Most powders, if not enough(1-2gr) is put in the case(depending on volume) won't "ignite explosively" just smolder,flash, and smoke,(put a spot on the sidewalk and light it,you'll see what I mean.That would mean the primer is all the pressure you'll get to push the bullet. Ironically ,a primer will push a bullet about 1/2" down the barrel, hmmmmmmmm Last edited by dunerjeff; May 10, 2012 at 06:25 PM.