View Single Post
Old March 18, 2012, 08:20 PM   #2
Senior Member
Join Date: December 6, 1999
Location: Richmond, Virginia USA
Posts: 6,004
Probably 25 to 35 inch-pounds. Or just center the action and barrel in the stock and hold it there while you tighten the rear one a little, then the front, then the rear, etc. Don't overtighten, just snug them up and add an 1/8th of a turn or whatever works. And make sure the barrel doesn't touch the barrel channel except back near the receiver.

johnbt is offline  
Page generated in 0.07159 seconds with 7 queries