The Firing Line Forums - View Single Post - New shooter/reloader 38spc. Lee Classic Loader

m&p45acp10+1 · February 14, 2012, 06:02 PM

I would recomend a different powder other than HiSkor800x I have not seen a single load for .38 spcl published with it. That is from the Lee chart with my .38 spcl dies, The Lyman Pistol & Revolver 3rd edition, and from Hodgdon. Besides .5 cc sounds a bit much for a wad cutter. If using a Hollow Base WadCutter you are running a huge risk of blowing the skirt out on it.

Now 700x is listed for loading .38 spcl. Though if it meters like 800x I would not use it without a scale. I would recomend using something like Bull's Eye, or Titegroup. Both meter well, and work very well with loads for .38 spcl.

February 14, 2012, 06:02 PM	#12
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	I would recomend a different powder other than HiSkor800x I have not seen a single load for .38 spcl published with it. That is from the Lee chart with my .38 spcl dies, The Lyman Pistol & Revolver 3rd edition, and from Hodgdon. Besides .5 cc sounds a bit much for a wad cutter. If using a Hollow Base WadCutter you are running a huge risk of blowing the skirt out on it. Now 700x is listed for loading .38 spcl. Though if it meters like 800x I would not use it without a scale. I would recomend using something like Bull's Eye, or Titegroup. Both meter well, and work very well with loads for .38 spcl. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.