View Single Post
Old October 20, 2011, 10:16 PM   #16
Senior Member
Join Date: December 24, 2008
Location: Loveland, CO
Posts: 1,475
None of my reloading manuals has that data.
The Nosler manual has most of the AI cartridges. It also has fire forming load recommendations.

Just an observation, you sound relatively new to a AI cartridge. I would suggest you ask lots of questions before you begin firing/loading for your new adventure.

Hornady also makes a caliber specific neck sizing die. Midway has them and you can buy the .25 caliber and it will work on all cartridges using that bullet. I have some, but the Lee Collet die will give you the least neck runout and with the case dimensions it is a natural for neck sizing. The sharp shoulder will allow many loads before full length sizing is necessary, provided you aren't off the chart with hot loads.
jepp2 is offline  
Page generated in 0.03335 seconds with 7 queries