The Firing Line Forums - View Single Post

PA-Joe · September 9, 2011, 05:54 PM

It's a final crimp issue. Tighten the crimp down just a little. The crimp is done by the seating die. Try 1/4 turn down.

September 9, 2011, 05:54 PM	#11
PA-Joe Senior Member Join Date: June 9, 2010 Location: NEPA Posts: 909	It's a final crimp issue. Tighten the crimp down just a little. The crimp is done by the seating die. Try 1/4 turn down.