The Firing Line Forums - View Single Post - 22-250 Reloads won't Chamber?

murphjup · September 1, 2011, 03:45 PM

Mehavey, I understand what you are saying, but with a factory round they chamber fine, I am also able to chamber my brass fine with no primers installed...

I found this thread online in my searches...

http://www.thehighroad.org/archive/i.../t-509641.html

This is the identical problem I am having...

So I will first try a new priming tool from Lee and if not, purchase a uniformer...

I do believe after all my research, that with a controlled feed bolt primer depth can be an issue for chambering..

Thank you for your reply...

September 1, 2011, 03:45 PM	#9
murphjup Senior Member Join Date: November 18, 2006 Location: Jupiter, Florida Posts: 460	Mehavey, I understand what you are saying, but with a factory round they chamber fine, I am also able to chamber my brass fine with no primers installed... I found this thread online in my searches... http://www.thehighroad.org/archive/i.../t-509641.html This is the identical problem I am having... So I will first try a new priming tool from Lee and if not, purchase a uniformer... I do believe after all my research, that with a controlled feed bolt primer depth can be an issue for chambering.. Thank you for your reply...