View Single Post
Old July 20, 2011, 10:19 PM   #2
Join Date: April 20, 2009
Location: S.E. New Hampshire
Posts: 30
initial lubing of lube pad

Yes, you can over lube (which is usually my problem). Normally on a new pad, I will pour 1 1/2-2 tbsp. of lube onto the pad, and slowly massage it into the pad with my fingertips, until a majority of the lube has been absorbed. I will then let the pad sit covered in a corner for a day or two. At that point, most of the lube has been absorbed into the pad. A little of that lube goes a fur piece.
USMC Vet is offline  
Page generated in 0.05565 seconds with 7 queries