View Single Post
Old December 7, 2010, 09:18 PM   #6
James K
Join Date: March 17, 1999
Posts: 24,160
When you put grips on a gun with bushings, make sure the screw heads bottom on the bushing and just touch the grips enough to keep them solid. That prevents crushing the grips, which should not be done and is not necessary. Also if you use slim bushings, make sure you shorten the screws if necessary so they don't protrude into the mag well and scratch the mag or prevent it from moving freely.

Jim K
James K is offline  
Page generated in 0.03140 seconds with 7 queries