|
Hey guys.
Regarding the trimmer, I use a Giraud Power Trimmer, the one that looks like a pencil sharpener. All my cases are within +/- .002 of 1.750 so that shouldnt be a problem.
I won't have access to my loading station until later tonight or tomarrow so i will just seating the bullet with no crimp at all and see if that works. Also, I will pop on my sizing die as well to make sure the case neck is up to spec.
Its not that the further i seat the less neck tension i get, my problem is this:
^
| |
| | < When Seated up here, bullet would hold firm
] [ <The case would move around in this entire cannelure part
| | < When sized doen here, bullet would hold firm
| |
Thank you for your quick responses! I will try all the techniques and report back. Also, I will try the lee crimp die if all else fails. Its on sale on midway for 8 bux. I'm shooting these outta my AR so i feel that a crimp is necessary to prevent back-out.
|