Quote:
Those official loads from the manuals are still well below max loads for 10mm. My Lyman 49th stops every load for 10mm right around 29,000psi and most of those loads in the OP appear to be in that general area.
Full power loads should generate a max of 37500psi
|
Lyman is the only manual I have that list pressure. However most of the powder manufacturers list pressure in their data.
Accurate Arms 10MM data runs from 33K to 37,500. Ramshot data runs from 30K to about 36K.
Hodgdon data runs from about 32K to 37K.
Remember the pressure listed is max Average Pressure for the loads tested.