|
Bump.... .your process looks pretty good/tight.... couple of things that I noticed.... you might have better luck with Ramshot Tac powder....(is what I use after talking to several people about .223)....the sizer there are only two.... one is full length and one is neck only which they call a collet die... if you are sizing for an auto... you should full length size always... also.... your bullet seat depth should be checked by trying to aquire your individual rifles chamber length... not all lengths are the same.... is part of fine tuning your reloads... your bullet should be seated 5 thousands behind the lands of your barrels rifling.
|