The Firing Line Forums - View Single Post

thunderace · February 7, 2009, 09:59 AM

Hi, I have a Belgian made single action 5 shot 38/40 revolver made post 1894with the E L G and cown proof marks.It looks like a Colt Peacemaker But is a slightly smaller frame.It is missing its cylinder stop and spring.It is set up different inside than Colt and S&W.It has 2 screws in frame for hammer and trigger set in a straight up and down pattern and a frame pin about 3/4 inch in front of the trigger screw position.The cyl stop window is 1/4 inch in front of cross pin .I dont know what the cyl stop and spring look like for this .There is no screw hole under guard frame to mount a cyl stop spring Like Colt or S&W.If anyone can help me with this I would be very greatfull thanks Thunderace

February 7, 2009, 09:59 AM	#1
thunderace Junior Member Join Date: February 6, 2009 Posts: 1	Belgian revolver, Colt Peacemaker clone Hi, I have a Belgian made single action 5 shot 38/40 revolver made post 1894with the E L G and cown proof marks.It looks like a Colt Peacemaker But is a slightly smaller frame.It is missing its cylinder stop and spring.It is set up different inside than Colt and S&W.It has 2 screws in frame for hammer and trigger set in a straight up and down pattern and a frame pin about 3/4 inch in front of the trigger screw position.The cyl stop window is 1/4 inch in front of cross pin .I dont know what the cyl stop and spring look like for this .There is no screw hole under guard frame to mount a cyl stop spring Like Colt or S&W.If anyone can help me with this I would be very greatfull thanks Thunderace Last edited by thunderace; February 7, 2009 at 12:12 PM.