View Single Post
Old November 13, 2006, 12:44 AM   #182
Senior Member
Join Date: March 8, 2000
Posts: 673
Hot Damn- Test Results of 4 plastic cases.
Rem high base 3" case, with 600 gr
Dixie hardened slug. Roll crimped with
crimper in drill press. All 4 loaded with
90 gr of 4759. We have a winner.
Average velocity of 4 -- 1938 fps
Average pressure of 4 -- 14, 575 psi.
tested with transducer test ing setup,
in 30 inch barrel,In my 24" NEF I got 1800+.
Cases fell out of his test chamber like they did out of my NEF.And with some cases I can get in 95gr, that
I figured with my math would
have 15k psi.So my math and developement is
OK.And 4800 ft lbs, thats neat with plastic.
Tom says this load will do in any gun that handles the 2 oz factory magnum goose loads
that test about 13,600 to 14,000.And 4759
will give slower time to peak pressure, thus
will be easier on cases than magnum goose loads
or the hot factory Buckhamer slug loads
I fired, that expanded cases as much or more
than our 4759 loads.Ed
HUBEL458 is offline  
Page generated in 0.09678 seconds with 7 queries