View Single Post
Old October 8, 2006, 01:40 AM   #171
Senior Member
Join Date: March 8, 2000
Posts: 673
Got the NEF chambered for long case. And remember it
has beefed up hammer for bmg primers used in our case.
Got 2500 fps with 600 gr slug, cases eject out real easy,
8300 ft lbs from an NEF with 24 inch barrel.If you set up
NEF to use regular primers adapted to our case or
have Rocky Mtn make a long case you can do it without
a lot of work on the hammer and springs. Just use a
flake shotgun powder as a starter powder above the
primer, which how 700 NE and others are loaded.
Use 10 gr of flake and cut regular load 40 gr and
work up if pressures allow.Ed.
HUBEL458 is offline  
Page generated in 0.03888 seconds with 7 queries