The Firing Line Forums - View Single Post - Cracks in forcing cone

James K · September 23, 2006, 07:50 PM

And if you are the one who fired those hot loads, cut back or the same thing will happen to any new barrel. There is no way the forcing cone can be made bigger or stronger since both the outside diameter and the inside diameter are fixed.

Jim

September 23, 2006, 07:50 PM	#5
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	And if you are the one who fired those hot loads, cut back or the same thing will happen to any new barrel. There is no way the forcing cone can be made bigger or stronger since both the outside diameter and the inside diameter are fixed. Jim