Thread: reloading 9mm
View Single Post
Old April 20, 2000, 08:40 PM   #2
Senior Member
Join Date: January 29, 2000
Location: Wa
Posts: 922
I use lazercast lead bullets for all my reloading. In the 9MM cal. I use win 231
4.3 grains and a good taper crimp, win Primer and an OAL of 1.070 I have also used bullseye 4.2 grains, and tightgroup 4.3 grain
Tightgroup produces more felt recoil then bullseye or WIN231.
Try upping your load to 3.6 to 3.8 grains
and see if your accuracy improves if not I would suggest Trying a differant bullet.lazer cast bullets made by Oregon Trail Bullets are very accurate. and dont lead you barrel. Or your money back.

Good luck and let me no how it turns out.

Tony Z

also for gun accessorys.

[This message has been edited by tonyz (edited April 20, 2000).]
tonyz is offline  
Page generated in 0.03969 seconds with 7 queries