View Single Post
Old June 10, 1999, 09:32 PM   #2
George Stringer
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Albin, there are several things you can do to make the trigger feel better and lighter while it won't actually lighten the pull. One thing that will is a lighter trigger spring. But you can only go so far there. The spring has to have enough power to reset the trigger. Most of the improvement will come from polishing the sides, NOT THE ENGAGEMENT SURFACES, but the sides of the trigger bar and cam where they rub against the frame and grip. Check the sear body and the hole it sits in for burrs or rough spots and polish if necessary, but, again, not the sear/firing pin engagement. Basically that's about all you can do. But, smoother usually translates into lighter where triggers are concerened. George


George Stringer is offline  
Page generated in 0.05345 seconds with 7 queries