View Single Post
Old June 17, 2005, 05:45 AM   #2
Join Date: June 14, 2005
Posts: 23
6mm die

The 6mm cartridge is longer than a 243. The seating stem would need to be screwed down too far.
When you would try to seat a bullet it would not be supported inside the die and would tend to plop over and enter the case at an angle crushing it. Jim

Last edited by rambo1937; June 17, 2005 at 05:48 AM. Reason: more info
rambo1937 is offline  
Page generated in 0.04487 seconds with 7 queries