PDA

View Full Version : Daewoo DH 40 Disassembly


Dyno 10
January 16, 2002, 01:33 PM
Just wanted to know disassembly procedure for a Daewoo DH 40, so I can give it a good cleaning. Thanks in advance.

johnwill
January 16, 2002, 08:07 PM
Pretty sure it strips just like my DP-51.

- Remove the magazine, and insure the chamber is unloaded.
- Retract the slide until the clearance cut in the slide is aligned with the top of the slide stop pin.
- Press the pin out from the opposite side.
- Remove the slide to the front.
- You can then remove the barrel and recoil spring for cleaning.

Dyno 10
January 17, 2002, 06:48 AM
Thanks alot Johnwill