View Full Version : remington 1100 another jam issue
November 22, 2012, 11:36 AM
My Grandfather gifted me his 1100 12 ga. with a Hastings fully rifled slug barrel and a vent rib barrel with a few chokes. The gun only shoots 2 3/4 shells. I broke the gun totally down and cleaned it very well including the gas ports in the barrel. After i got it all back together i took it out to see if the red dot was still slightly zeroed. (gun sat in his safe for like 10 years) the hornady sst hit dead center at 50 yards. However, when a new shell was loaded into the chamber a second shell came out of the mag tube and jammed. i had to remove the barrel to get the shell out from the chamber and repeatedly pulled on the bolt handle gently to pull out the jammed shell. At first i thought it was still dirty or an o ring issue but it does the same thing if i run the action manually. Any help would be great. All my other shotguns are wingmasters and 37's no issues there lol
November 22, 2012, 05:14 PM
Sounds like a shell latch issue. Either broken, bent, or missing possibly.
big al hunter
November 22, 2012, 09:21 PM
I agree with the Virginian, Google rem 1100 diagram and make sure you put the latch in properly. If it is in properly check all the other parts for orientation. An autoloader is a complicated machine, I wish you luck. Also, the sst slugs have a trajectory that will get you past 100 yards.
November 24, 2012, 08:03 AM
Thanks for the help I had a feeling something like that could be the culprit.
November 24, 2012, 01:33 PM
Just reread this. if you are saying it is releasing two shells at a time, check the interceptor latch, interceptor latch spring, and the relationship of the left connector and disconnector in the trigger group. Shell latch controls the release of the first shell out of the mag, the interceptor makes sure it only releases one at a time.
vBulletin® v3.8.7, Copyright ©2000-2017, vBulletin Solutions, Inc.