View Full Version : TriDelta Tactical AR15 Muzzle Brake Review

October 24, 2012, 04:38 PM

A muzzle brake on a 5.56 AR may not be necessary but, a good one helps you keep the muzzle on target during rapid fire and will likely allow more accurate shooting with smaller split times at a given distance. That's my $0.02 anyway...

Here's a quick summary of what I've found from the TriDelta Tactical brake while running it on my LE6920:

-Top port directs energy up to keep the muzzle flat while firing in addition to the two side ports
-No ports on the bottom, unlike some other popular brakes, which keeps dirt/sand from kicking up when firing from the prone
-Same size as the A2 brake so no change in OAL of your rifle-Made in the USA from US steel
-Mil spec phosphate coated, not painted like some others

-No POI shift with the brake vs. the A2
-Only weighs 2.5oz
-Cost. It sells for $48
-No machining marks anywhere on the brake; very smooth appearance inside and out
-IDPA/USPSA competition legal
-30 day, 100% satisfaction money back guarantee

-It's slightly louder than the A2 (still not as bad as many brakes out there.
-It doesn't come with a crush washer. Not a big deal but just putting it out there so people know when/if they go to order one.

All in all, it's an effective brake at a cost under $50. I haven't had the chance to fire it at night but I'd imagine there is some trade off in terms of muzzle rise vs flash suppression as there usually is with most brakes. I was shooting cheap Silver Bear in the video below and a fire ball was visible with both the A2 and the TriDelta Tactical brake due to the lack of flash suppressants in the ammo.

Product Link (http://custommuzzlebrakes.com/#ecwid:category=2932347&mode=product&product=11810478

Here's a video of me shooting with the TriDelta brake and the A2 using the same gun (Colt 6920) and ammo (55gr Silver Bear):

Muzzle Brake Review HD Video Link (http://www.youtube.com/watch?v=wTmCxXYD7h4&feature=g-upl)


October 25, 2012, 06:13 AM
I had a Miculik brake on one of my ARs the extra sound wasn't worth the little bit of recoil reduction. Glad you are happy with yours!

October 25, 2012, 07:18 AM
The problem with the Miculik brake is the same as the problem with the standard AK 74 brake---the shape of the ports in the brake directs sound directly out to the side which comes back to the shooter. The, concept at least, of the delta shape of these brakes is to push the sound forward as well as to the side/up. This brake is a certainly louder than its' big brother below but it's shorter; just depends what you want to prioritize (size or sound).