Remington Nylon 66 Assembly instruction

[TonyV]

I would like to take mine apart and give her a good cleaning but don't have instructions. Thanks, Tony. [email protected]

[Bill DeShivs]

Don't disassemble it. You may never get it back together.

[williamd]

Go on-line to Remington and download the manual .. for free. It is an easy gun to work. One little angle metal part (number 19) that has to go back in right but just watch how you take it out.

Here ....

[KEVING]

My brother in law took a Nylon 66 apart and like so many can't figure out reassembly. Any help doing this available here? He has no manual for this gun. Tried the Remington website for a possible manual download. Only seems to have current model weapons though.
Thanks much for any help at all guys,
Kevin G. [email protected]

[Cunfuzed1]

All the Remington nylon information that you could ever need can be found here. http://www.nylonrifles.com/NylonRifles/Welcome.html

[montveil]

I had difficulty with part 13 as it has to go above the pin. It is a little difficult and is not illustrated in the parts diagram.
I wouldn't fully dissemble the 66 but remove the bolt and clean any carbon you can reach with a chopstick etc and clean the bolt assembly with a solvent spray gun cleaner available Walmart etc