PDA

View Full Version : Cz-p01


downfall
September 6, 2007, 08:36 PM
I have been looking for the go to CZ vendor on the net for one of these and i haven't been able to find the vendor yet. Can anyone point me in the right direction for this?

quickcanary
September 6, 2007, 08:39 PM
Bud's Gun Shop would be a good place to start -- great prices and great service, from what I've heard. Perhaps my fellow members can suggest other options...

JWT
September 6, 2007, 08:49 PM
Try ghostholster.com and also thegunsource.com.

CraigKN
September 6, 2007, 08:49 PM
You could get a modded one from Angus:

http://ghostholster.com/

downfall
September 6, 2007, 09:04 PM
Thanks for the info, I did not see any P01 on the website. I am new to the CZ world so forgive me if I am asking some real basic questions. Is the P01 still available from CZ or is the SP01 the replacement?

quickcanary
September 6, 2007, 09:21 PM
P-01 (http://www.budsgunshop.com/catalog/product_info.php/cPath/21_82/products_id/13658)

SP-01 does not replace P-01; it is the full size version while the P-01 is the compact.

Mark54g
September 6, 2007, 09:53 PM
Also,

The SP-01 is steel framed while the P-01 is aluminum alloy framed.

downfall
September 6, 2007, 11:32 PM
Thanks for the info and answering my CZ questions.

Willie D
September 7, 2007, 10:33 AM
I would consider the PCR. Same as the p-01 without the rail and with no-snag sights.

armoredman
September 7, 2007, 11:16 AM
Almost the same, PCR frame investment cast, PO1 frame is forged alloy. Not that that would really matter over the long run - I've had both, and will have a PCR again when life improves.

http://i16.photobucket.com/albums/b13/armoredman/PCRPO1.jpg

The PO1 is still available, one of the hottest selling pistols CZ carries. As a matter of fact the new PO6 will be on shelves soon, a 40SW version of the PO1. The PO1 can also now be had with Crimson Trace Lasergrips from the factory, even with the CZ-UB logo on the grip panel.


http://i16.photobucket.com/albums/b13/armoredman/spltthenight2smaller.jpg

One excellent dealer is J&G Sales in AZ, http://www.jgsales.com/ , but a better idea is to call CZ-USA, 1 800 955-4486, and ask them who is an authorized dealer in your area.
Then slide over to czforum.com, and czech it out! http://p201.ezboard.com/bczechpistols82792

DWARREN123
September 7, 2007, 08:11 PM
I purchased my CZ's from a store in Kentucky. Don't know if they have what you want but they are a stocking CZ dealer, give them a call and see what they can do for you.
WWW.WHITTAKERGUNS.COM

downfall
September 7, 2007, 08:49 PM
thanks for the info on the gun, could also use info on where to get a dog to help with the reloading. ;)

lanternlad
September 7, 2007, 09:31 PM
Don't know where you are, but Academy has them (I'm in Texas).

http://www.academy.com/index.php?page=content&target=products/outdoors/hunting/center_fire_handguns&start=0&selectedSKU=0357-00579-1199

DWARREN123
September 8, 2007, 02:41 AM
The dog trained me on how to reload!:D

armoredman
September 8, 2007, 10:39 AM
You ain't gettin' mah dawg!


http://i16.photobucket.com/albums/b13/armoredman/Snickersshotgun.jpg