View Full Version : Remington 11 question
February 4, 2002, 03:02 PM
There is a ring that sits on top of the recoil spring, slipping over the spring guide rod. One side of the ring is flat; the other side is dished. Which side goes up, towards the muzzle?
February 4, 2002, 07:33 PM
'Lo noban ,
As I recall , the stack on a Rem 11 is the same as for an A-5 ;
for light loads , the ring should be against the receiver with the
flat side against the recoil spring ; for heavy loads , the ring goes between the friction collar and the recoil spring with the flat against the spring .
As the barrel recoils , for heavier loads , the concave side of the ring "squeezes" the friction collar to increase friction . Generally ,
the "drier" you can get the mag-tube and still have the gun cycle ,
the softer it will shoot . Too much oil will negate the friction collar's purpose .
Nomenclature may be off , Hawkaaa53
February 4, 2002, 07:37 PM
Hawkaaa53 - That's the info I was looking for and that's just the way it's now assembled. Thanks much!
vBulletin® v3.8.7, Copyright ©2000-2017, vBulletin Solutions, Inc.