CZ75B Trigger ??

[AC's & 45's]

Is there an easy way to remove the mushiness from the trigger mechanism? This pistol is fun to shoot. It seems to be very reliable. However accurate shooting does take considerable effert and concentration.

[Mikke]

I know there is gunsmiths here in Sweden who fixate the sear-block (don't know the right name) in the CZ. If you take the slide off and cock the gun, then put it on safe, you can see the parts moving if you pull the trigger (still on safe). This is apparently part of the "mushiness" and possible to get rid of by fixating the whole thing in the frame.

The easy solution, that goes a long way, is letting a gunsmith work on the trigger, without fixating the whole block in the frame.

[RON in PA]

The sear camms back the hammer when you pull the trigger. This leads to "stacking", ie., the trigger pull actually increases just before break. This was probably designed into the gun for legal reasons?. Anyway, it will improve to a degree as the gun wears in and you can also improve the trigger pull by applying "Gun Slick" to the sear and hammer contact surfaces.