PDA

View Full Version : Please delete.


V4Vendetta
February 26, 2007, 10:25 AM
fixed problem.

hoghunting
February 26, 2007, 10:44 AM
Take the stock off and pull the trigger housing out. You'll be able to see if anything is stuck behind the bolt or if the recoil spring or guide is jammed. While you have it apart, clean it. The 10/22 is very reliable and usually only has problems when too much gunge builds up in the action.

http://stevespages.com/pdf/ruger_1022.pdf

Here are disassembly instructions if you need them.

V4Vendetta
February 26, 2007, 11:07 AM
I JUST FIXED IT:) ! When I bought the 10/22, it didn't have the rails for a scope though it was drilled & tapped for them. I bought the rails & rings a while back & put them on. They were the problem. I loosened the screws holding the rails to the gun & now I have no trouble:) :) ! This means I'm going to have to stick with iron sights but that's ok. Thanks for the help.:)