The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 12, 2001, 09:09 AM   #1
K80Geoff
Senior Member
 
Join Date: December 20, 1998
Location: NE Pennsylvania
Posts: 3,640
255 Grain SWC in 45ACP!

One night at the range I got into a conversation with another shooter. One thing led to another and he gave me 5 45ACP rounds to shoot in my Gold Cup Trophy. I fired them off and the results were astounding. I actually put all 5 in the black at 25 yards using iron sights. For me this is absolutely amazing!

I asked him for the recipe and he said 3.1 gr bullseye pushing a 255 hard swaged 255 grain SWC. I neglected to ask him who makes the bullets.

I have checked every reloading reference I can find and cannot find loading data for 255 gr in 45ACP. The only 255 gr bullets I can find are made for 45Long colt.

Anyone possibly know of data somewhere on this specific loading?

The guy hasn't been back to the range, if he shows up I will tie him to a chair and extract the info from him
__________________
I am no longer a member of this forum. Bye!
K80Geoff is offline  
Old December 12, 2001, 10:27 AM   #2
rg1
Senior Member
 
Join Date: November 6, 2001
Posts: 744
midway 255 grain SWC

Midway has a 255 grain SWC listed in their Midway .45 ACP "LoadMap" loading data book. I suppose you may find the bullets at Midway also.
rg1 is offline  
Old December 12, 2001, 10:36 AM   #3
rg1
Senior Member
 
Join Date: November 6, 2001
Posts: 744
255 SWC

Midway's data with the Midway 255 SWC using Remington cases and RP2 1/2 primer with Alliant Bullseye powder. Starting load at 3.1 grains and up to 3.9 grains maximum. Velocity 640-754 fps. The loaded overall length was 1.275 inch.
rg1 is offline  
Old December 12, 2001, 03:02 PM   #4
K80Geoff
Senior Member
 
Join Date: December 20, 1998
Location: NE Pennsylvania
Posts: 3,640
Midway Load Map!

That's one resource I do not have. Guess I'll get one from Midway.

Thanks for the lead
__________________
I am no longer a member of this forum. Bye!
K80Geoff is offline  
Old December 13, 2001, 01:55 AM   #5
KP95DAO
Senior Member
 
Join Date: December 30, 2000
Posts: 699
I used to shoot 305 gr bullets out of my Star PD for kicks. And it did.
KP95DAO is offline  
Old December 15, 2001, 09:10 AM   #6
jtduncan
Senior Member
 
Join Date: December 5, 1999
Location: Seattle, Washington, USA
Posts: 1,681
Isn't the 255 SWC a 45 auto rim bullet though?

And was he shooting them out of 45 ACP cases? I'll assume so since your 1911 functioned.

Any recipes for those who have SW 625 revolvers that would love to feed SWCs longloaded?
__________________
The Seattle SharpShooter - TFL/GT/AR15/SGT/PCT/KTOG/SWF/RF/HKPRO/OA2/1911Forum
Reloaded .223 Rem, 9mm, 40SW, 357 SIG, 10mm, 44 Spl, 44 Mag, 45 ACP Today?
jtduncan is offline  
Old December 16, 2001, 01:44 PM   #7
Newservicecolt
Junior Member
 
Join Date: June 3, 2001
Location: On the Lam
Posts: 14
I used to use the RCBS 45-255 in my Colt, when carrying.
Sized at .452 and loaded over 5.1 Unique. Rather heavy but frightfully accurate.
NSC
Newservicecolt is offline  
Old December 16, 2001, 03:28 PM   #8
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,116
I've loaded a lot fo heavy bullets in .45 ACP cases - -

- - -And they work fine for me.

Most of mine have been the Rucker or Kead 255 LSWC over 5.0 gr. Unique in ACP cases. This was an outgrowth of an old quest for bowling pin shoot loads--Wanted sharp edges to grab the pins, rather than a smooth round ogive which tends to glance off. Feeds well in any .45 auto with a fairly broad throat. Don't go much hotter or you'll severely increase wear and tear on your 1911-type.

Same bullet and load goes very well in .45 Auto Rim cases. In my 1917 S&W, gives performance similar to, but superior to, the old .455 Webley 265 gr. load.

Please remember, friends--The .45 ACP cal guns, revo and auto, are NOT .45 Colts or .44 mags, etc. You can increase versatility, but don't wreck a fine pistola by trying to make it something it is NOT!

All the best,
Johnny
__________________
MOLON LABE!
Amendment II ensures the rest of the Bill of Rights.

Blog: Expert Witness
Johnny Guest is offline  
Old December 16, 2001, 08:44 PM   #9
zeke
Senior Member
 
Join Date: November 17, 1999
Location: NW Wi
Posts: 353
255 gn lrnfp's also seem to work very well in 45 acp using enough Unique to drive them to approximately 740 fps (5.0 gns). While not a caster, have used bullets casted from Lee's 255 gn lrnfp mold and the accuracy was excellent. These have a very broad flat nose, the bullet is undersized ahead of the crimping groove and the dia was .452 (no evidence of sizing).

Midway's 45 acp load map is very useful for comparing loads, unfortunately most the OAL's used are on the very long side. Would not use their 45 acp OAL's, but rely on other loading manuals.
zeke is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08231 seconds with 7 queries