The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old November 30, 2001, 10:13 PM   #1
Wildwilley
Member
 
Join Date: September 29, 2001
Location: Southwest Pennsylvania
Posts: 51
Whatcha all Shootin' ?

Out of all you fella's on this section of the board. How many of you shoot flintlocks?
Where are you from?
I'm writing a book on shooting the flintlock rifle and I was just wondering if anyone besides my pack of greybeards is gonna read it.
I'm from Pennsylvania. One of the last areas that have an exclusive flintlock hunting season.
What are you all shooting in the way of muzzeloaders?
Is there enough info for you fella's or would you like a well researched book on all types of front loading guns?
I'm interested in what you have to say.
__________________
Wild Willy
Wildwilley is offline  
Old December 1, 2001, 12:50 PM   #2
yorec
Senior Member
 
Join Date: February 2, 2000
Location: Wyoming
Posts: 2,324
I shoot a Cabelas kit Hawken .58 flintlock I built myself. Great gun, works well for anything up to elk and moose - gonna try bear again this spring!

I've been shooting muzzle loader for years, but flintlocks only a couple. When I completed my kit and started looking for information on how to make her run well I had touble finding a decent flintlock manuel. It seems that everyone nowadays is into this in-line craze and even oldstyle percussion guns are getting rarer. It actully took me two months to find some old books that would suit my purposes for my flintty. So all the more good informational boods on the subject published would be great - at least I think it would be. Good luck.

One of the more common "methods" of learning is to talk to someone who already does it. That's great, but the art of the flintlock is rapidly becoming a lost art. I know of only one ol' graybeard in my area who shoot traditional muzzloaders - neat guy, wears buckskins, has a full white beard, and leads a mule while elk hunting inthe back county with his .54! I asked him to teach me about flintlocks during my search and to my surprise - this guy who has lived and breather muzzloaders for over fifty years had never fired one! We fixed that quickly. Now he and I are the only ones I know of in a hundred mile radius who hunt with traditional muzzloaders - I'm the only flinter...
__________________
What part of "... shall not be infringed..." don't you understand?

My site - stop by n see what I'm all about... Yes, there is gun stuff.
yorec is offline  
Old December 1, 2001, 01:44 PM   #3
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,777
I'm shooting a flintlock Lancaster rifle that I built. Also have some Civil War repros like a 2 Band Enfield (English Parker Hale) and other modern percussion guns.

BTW, you can't beat those minie rifles for accuracy. They reach out farther than the patched round ball. However, for fun you can't beat a flintlock. BTW, if you're in the woods, it's also a good way to start a fire.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old December 1, 2001, 03:04 PM   #4
mcneill
Senior Member
 
Join Date: November 1, 2000
Location: Texas Hill Country
Posts: 288
I shoot two rifles, both .50 cal Hawkens by Thompson Center. One is flintlock, the other caplock. Love 'em both. I get most of the info I need from the NMLRA magazine "Muzzle Blasts". Would I buy another book on muzzleloading? Probably.

Good luck with your endeavors.
__________________
NRA Patron; TSRA Life; NMLRA; JPFO; SAS Associate

"His name was Jeremiah Johnson, and he wanted to be a mountain man. ... He was looking for a Hawken gun, .50 caliber or better. He settled for a .30, but d*** it was a genuine Hawken. You couldn't go no better."
mcneill is offline  
Old December 3, 2001, 02:36 AM   #5
Ed Dixon
Senior Member
 
Join Date: September 5, 2000
Location: Ireland
Posts: 308
Good luck with the book. I shoot a Lyman Trade Rifle(.50 cal, flintlock), purchased about eight years ago at Dixon's Muzzleloading in Kempton, PA. My strong guess would be that you're familiar with that establishment if you're from PA and in the field. Just browsing through it and listening to the conversations among proprietors and customers can be a real education. If somehow you're not aware of it, it would be worthwhile to talk to Chuck or his son Greg. Some years ago, I disassembled a repro cap n ball before really knowing the gun. I took it to a nearby gunsmith, who said I'd have to leave it and the price would be $35. As I needed some supplies at Dixon's anyway, I brought the pieces up with me ( a 60-mile drive) and Chuck had them back together in five minutes, no charge added to my small purchase. I can do as fast myself now, but the generous knowledge of that place is hard to beat. (By the way, I'm no relation.)
Ed Dixon is offline  
Old December 3, 2001, 09:45 AM   #6
Cap n ball
Senior Member
 
Join Date: October 17, 2000
Posts: 247
The two flinters I have are originals and I don't shoot them except on special occassions. I have an English 1761 New Land Pattern 'horse pistol', smoothbore 58/9 caliber with a Wilots tower stamped lock that was given to my great,great,great grandfather as a present at the end of the Revolutionary War. He was a quartermaster for Gen. Greene. The youngest male over seven gets to fire it on the 4th of July after reading the Declaration of Independence to the assembled family and guests. My other is a 1809 Prussian musket in 69 cal with the arsenal of the city of Philadelphia stamp on the breech. It belonged to my great grandfather. We used to shoot it as a fowling piece on the farm but I haven't fired it in years. My grandpa used to call it his 'punkin thrower'.

Last edited by Cap n ball; December 3, 2001 at 12:07 PM.
Cap n ball is offline  
Old December 3, 2001, 12:18 PM   #7
Wildwilley
Member
 
Join Date: September 29, 2001
Location: Southwest Pennsylvania
Posts: 51
Thanks

Thanks fellas for all your intrest.
I'll continue on and complete the flintlock book.
I've been called an expert on flintlocks, but I find out somthing new everyday.
If I can be of any help to you all please feal free to e-mail me, it's part of my job and you won't be pestering me.
Again Thanks.
__________________
Wild Willy
Wildwilley is offline  
Old December 3, 2001, 01:22 PM   #8
BigG
Senior Member
 
Join Date: May 19, 1999
Location: Atlanta, GA
Posts: 4,304
I've fired the Thompson Center Hawken flintlock extensively and really got a lot out of it. The challenge of getting a flinter to go off almost 100% and learning to achieve that is a satisfying accomplishment. Unfortunately, I sold it during a gun cabinet downsizing.

I picked up a Pedersoli Brown Bess .75 bore musket but up until now it's been a wallhanger. The 3/4" balls are really impressive, though!
__________________
o "The Earth is degenerating today. Bribery and corruption abound. Children no longer obey their parents, every man wants to write a book, and it is evident that the end of the world is fast approaching." Assyrian tablet, c. 2800 BC

o "In the beginning of a change, the patriot is a scarce man brave, hated, and scorned. When his cause succeeds, however, the timid join him, for then it costs nothing to be a patriot." Mark Twain

o "They have gun control in Cuba. They have universal health care in Cuba. So why do they want to come here?" Paul Harvey

o TODAY WE CARVE OUT OUR OWN OMENS! Leonidas, Thermopylae, 480 BC
BigG is offline  
Old December 3, 2001, 01:55 PM   #9
ebachman
Member
 
Join Date: December 11, 2000
Posts: 53
New to Flint

As others I've been muzzleloading for years with a Percussion Kentucky Long rifle from kit. Recently picked up a Pennsylvania Long Rifle from Traditions and haven't looked back. It was a big hit at our harvest festival at church when I donned the Continental Officers uniform.
A new perspective is brought to history when you "participate" in it.
ebachman is offline  
Old December 4, 2001, 12:03 PM   #10
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,539
I shoot and hunt with a T/C Grey Hawk (percussion side hammer, but stainless steel). I'm hoping to scrape together enough pesos for one of the stainless steel T/C Firestorm flinters. I like the actions, I just really hate rust and oil deadened caps, pans and barrels! I may crack and pick up a Lyman flinter though...
I'm self taught, and cast my own roundball and maxiballs, as well as cutting and lubing my own patches. It's more satisfying for me to have about 50% of what goes into my barrel be handmade components. I for one would read a flintlock book!
Poodleshooter is offline  
Old December 6, 2001, 01:12 PM   #11
ed mason
Member
 
Join Date: October 23, 2001
Posts: 67
I shoot a tvm fowler.its 62 cal/20 guage.It kills deer in the fall and turkeys in the spring.
ed mason is offline  
Old December 14, 2001, 03:37 PM   #12
AyeAye
Member
 
Join Date: August 31, 2001
Location: NW PA
Posts: 99
T/C Renegade .54

Inherited this when my father passed. Brother has its twin. We're going out hunting this year. BTW - also from PA (close to where I79 and I80 intersect)
AyeAye is offline  
Old April 15, 2002, 04:39 PM   #13
Sixgun_Symphony
Junior member
 
Join Date: April 13, 2002
Location: Seattle
Posts: 92
.50 caliber Lyman Great Plains rifle.

Going to buy a kit, perhaps a Jaeger rifle for Elk and Bear.
Sixgun_Symphony is offline  
Old April 23, 2002, 05:41 PM   #14
Snake Jenkins
Registration in progress
 
Join Date: April 18, 2002
Posts: 37
I use a pair of Tennesse Mountain rifles that I built, one is a .50 with a L&R Durrs Egg lock in it. The other is a .32 with a L&R Dickert lock in it. Both rifles are very fast and with the Green Mountain barrels they are very accurate.

Snake
Snake Jenkins is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09302 seconds with 7 queries