tac star side saddle mod

mr_p7m8 · November 26, 2001, 04:26 PM

Hey guys,

I'm thinking of putting a modified tac star side saddle on my browning gold stalker. I was wondering if it would be easy to modify, for example just drilling the right hole in the plastic saddle etc.

Also does any of you know which model would fit the browning gold the best, like the winchester 1300 or remington 1100 model?

Thanks

Erick Gelhaus · November 27, 2001, 12:27 AM

The Side Saddle's are pretty much model specific. I'm curious as to why you'd want to put one on your Browning too.

Bullmoose · November 27, 2001, 01:52 AM

Some people do not bolt their side saddles when they have an alluminum receiver as they think that the extra weight elongates the trigger pin holes in the alluminum. I shoot with two guys that have used double sided tape to hold the side saddle on Benellis and Mossbergs. Should work on your Browning. So far neither have had a problem and one of the guys is the head shotgun instructor at FrontSight and shoots his a lot.

November 26, 2001, 04:26 PM	#1
mr_p7m8 Member Join Date: February 13, 2000 Posts: 22	tac star side saddle mod Hey guys, I'm thinking of putting a modified tac star side saddle on my browning gold stalker. I was wondering if it would be easy to modify, for example just drilling the right hole in the plastic saddle etc. Also does any of you know which model would fit the browning gold the best, like the winchester 1300 or remington 1100 model? Thanks

November 27, 2001, 12:27 AM	#2
Erick Gelhaus Staff Emeritus Join Date: October 28, 1998 Location: Northern CA Posts: 2,750	The Side Saddle's are pretty much model specific. I'm curious as to why you'd want to put one on your Browning too.

November 27, 2001, 01:52 AM	#3
Bullmoose Senior Member Join Date: February 10, 1999 Location: Placentia,CA,USA Posts: 143	Some people do not bolt their side saddles when they have an alluminum receiver as they think that the extra weight elongates the trigger pin holes in the alluminum. I shoot with two guys that have used double sided tape to hold the side saddle on Benellis and Mossbergs. Should work on your Browning. So far neither have had a problem and one of the guys is the head shotgun instructor at FrontSight and shoots his a lot.