The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 27, 2001, 08:10 PM   #1
PDshooter
Senior Member
 
Join Date: March 30, 2000
Location: Illinois (PRI)
Posts: 599
Cast bullet load 30-06

Anybody have a pet load for 195gr GC in 30-06. I'll be using a springfield 03.
Have 4lbs of Surplus WC-846. Been told it has the same burn rate as BLC-2
PDshooter is offline  
Old October 27, 2001, 11:23 PM   #2
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,540
Generally, you want to hold the GC velocity to a max of 2,000 to 2,200 ft/sec.

You can get there with around 20 to 25 grains of 2400. Or equivalent burn-rate powders, SFAIK.

Nobody knows why, but there have been reports of detonation with reduced loads of IMR-style powders. (.243 with 3031, reported in The American Rifleman.) Dunno about other "full power" powders.

For your powders, go to your loading book, I guess.

So there's a beginning,

Art
__________________
You're from BATFE? Come right in! I use all your fine products!
Art Eatman is offline  
Old October 28, 2001, 08:36 AM   #3
MADISON
Senior Member
 
Join Date: January 1, 2000
Location: Roanoke, Virginia
Posts: 2,678
Cast Bullets in 30-06

For a lot of information....
Borrow and read pages 90 through 93 in the LEE MANUAL. Lee does not have the program for downloading. They get $5 for the disk.

You can take your full power load with it's original "hot load" powder and go down as far as you want. It should work with either jacketed or cast bullets.
MADISON is offline  
Old October 28, 2001, 09:26 AM   #4
Quantrill
Senior Member
 
Join Date: February 28, 1999
Location: Arizona, USA
Posts: 725
Cast Bullet loads in 30-06

Many Cast Bullet Ass'n (CBA) competitors use 18-20 grains of 4759 if you can find it. Quantrill
Quantrill is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06821 seconds with 9 queries