The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 22, 2001, 07:04 PM   #1
MadScientist
Senior Member
 
Join Date: February 20, 2001
Posts: 319
anybody ever stick a deprimer pin through their finger?

The other night I learned that watching SNL and reloading do not mix. While depriming, I went to move my hand out of the way after placing a case in the chuck and my finger wouldn't come along. Seems my lever hand caught up to my case-positioning hand and I put the deprimer pin through the end of my pointer finger, narrowly missing the bone.
I now have a new respect for the leverage of the loading handle. The thing popped the deprimer pin through my finger nail like it was a piece of paper.
MadScientist is offline  
Old October 22, 2001, 08:09 PM   #2
capbuster
Senior Member
 
Join Date: August 7, 1999
Location: Bessemer,Alabama
Posts: 301
If you have never pulled something stupid, then you havent done much living. At least you fessed up to it.Take care.
__________________
cliff
capbuster is offline  
Old October 22, 2001, 08:30 PM   #3
uglygun
Senior Member
 
Join Date: March 27, 2001
Location: Cowpie Ca
Posts: 552
OH GOD YES! Only did it once and hope to never do it again.


Was working through a lot of around one hundred 38 special cases out in my friend's garage while it was cold out, my fingers were sorta cold and I was trying to hurry. All of a sudden through a miracle of compound mechanical leverage, RIGHT TO THE BONE THAT DECAPPING PIN SANK! This was quite a few years back but if I look hard I can still see the scar on my right index finger.



But I think I got off lucky, some people have managed to take a piece of their finger off when a sharp edge of the case mouth came up and caught their finger shearing the skin right off. NOW THAT HAS GOT TO TICKLE!
uglygun is offline  
Old October 22, 2001, 08:36 PM   #4
labgrade
Member In Memoriam
 
Join Date: November 29, 1999
Location: west of a small town, CO
Posts: 4,346
" ... when a sharp edge of the case mouth came up and caught their finger ... "

Guilty - coupla times. No skin lose but there's this funny bio-feedback thing that says "Hey Stupid! Whatever you're doing that hurts so much - quit it!" Even with no brass & you "just" catch your finger with the ram, it'll make you wonder why you do things like that.

Impressive crushing power with a press. Got myself a D550 now & can crush more fingers faster ....
labgrade is offline  
Old October 22, 2001, 09:33 PM   #5
Good Guy
Senior Member
 
Join Date: August 4, 1999
Posts: 638
from the school of hard knocks.....

Not with the decapping pin. But once, many moons ago, when I was marathon loading 700 rounds of handgun ammo on a single stage press, I did get my thumb caught between the ram and the press frame. OUCH! Made one helluva impressive flap cut.
Good Guy is offline  
Old October 22, 2001, 09:59 PM   #6
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,313
I took a crescent out of my finger a couple of years ago, and also crushed the fingertip between the ram and the seating die.

That one made me pretty queasy...
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old October 22, 2001, 10:00 PM   #7
Big Bunny
Senior Member
 
Join Date: August 9, 1999
Location: New South Wales - Australia
Posts: 605
Finger crusher press -new!

Me too, a blood-blister was painful until lanced. Rockchucker press used with 40S&W cases.

I too will be more careful in future - a cautionary tale indeed.

Thanks for posting it, it was important that you felt you could share the incident with us all. Safety first.

BB
__________________
Bad boys, bad boys...watcha goin' to do - watcha goin' to do when they come for YOU ?!
Big Bunny is offline  
Old October 22, 2001, 10:26 PM   #8
Jack Straw
Senior Member
 
Join Date: July 26, 1999
Location: Georgia
Posts: 362
Even the short handle on a Lyman lubrisizer has quite a bit of leverage. I was sizing some round nosed .45 LC bullets and the top punch to fit those bullets has a sharp edge and is almost a full .45" in diameter...basically a 1/2 inch hole puncher. I had my left index finger between the ram and the top punch when gravity did its thing to the lever. I wound up with a .45 inch perfectly round circle punched into the back of my finger just below the nail. For 2 weeks, every time I bent that knuckle I would pop open a part of the cut...not much fun when you work with paint solvents. That's the sort of burn that just brings tears to your eyes.

Jack
Jack Straw is offline  
Old October 22, 2001, 10:36 PM   #9
seadog
Senior Member
 
Join Date: October 27, 2000
Location: Virginia
Posts: 287
Squashed my digit too. Slowed my rate down considerably that day. Big flap avulsion pulling a hunk of skin off. It will definitely light you up...You have no conception of the leverage involved until that happens...
seadog is offline  
Old October 22, 2001, 10:50 PM   #10
KP95DAO
Senior Member
 
Join Date: December 30, 2000
Posts: 699
Yes, a beveled case mouth will take a chunk out. About 25 years ago. Much more careful since then.
KP95DAO is offline  
Old October 23, 2001, 12:49 AM   #11
Freedom in theSkies
Senior Member
 
Join Date: October 7, 2001
Location: The "Nice Dictatorship" of Canada
Posts: 250
I caught my finger between the bottom of the sizing die and the top of the case ONCE.
If I was centered a bit better, I could have punched a chunk of meat out that sure as sh#t would have made a great little bullet. I don't think it would feed real well in my .45 though.

__________________
Live in peace... But defend it...Embrace it... But never take it for granted...
Freedom in theSkies is offline  
Old October 23, 2001, 10:10 AM   #12
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,117
YEP, sure have.

Smarts, doesn't it?

All these stories are giving me contractions, way south of my belt buckle.

Best,
Johnny
__________________
MOLON LABE!
Amendment II ensures the rest of the Bill of Rights.

Blog: Expert Witness
Johnny Guest is offline  
Old October 23, 2001, 11:40 AM   #13
Hawkman
Senior Member
 
Join Date: April 19, 2000
Location: Atlanta, GA
Posts: 442
Never a depriming pin, but I did put a screwdriver blade completely through my finger one time.

I have injured myself with tools so many times my wife has 911 on speed dial.
Hawkman is offline  
Old October 23, 2001, 05:27 PM   #14
Cheapo
Senior Member
 
Join Date: November 19, 1998
Posts: 986
Yuup!

And I'd thankfully forgotten it until you posted this blankety-blank thread!
__________________
Let us never forget that the only legitimate source of government power is the citizens. If WE cannot exercise a certain power, we cannot grant it to the state.
Cheapo is offline  
Old October 23, 2001, 09:01 PM   #15
slickpuppy
Senior Member
 
Join Date: August 29, 1999
Posts: 928
You guys are getting in too big of a hurry. Slow down and take a chill pill dudes.
slickpuppy is offline  
Old October 23, 2001, 09:06 PM   #16
labgrade
Member In Memoriam
 
Join Date: November 29, 1999
Location: west of a small town, CO
Posts: 4,346
Hey slickpup, load about 50K+ rounds on a stinkin' single stage press & you'll get pinched at least a coupla times.

Figure at least 2X operations per loaded rifle round & 3X+ for straight-walled pistol & we be talking serious potential for at least one (OK, 5 or more) screw-ups.
labgrade is offline  
Old October 23, 2001, 09:09 PM   #17
Denny Hansen
Staff
 
Join Date: June 29, 2001
Location: Prescott Valley, AZ
Posts: 2,367
Been there, hurt that.
__________________
S.W.A.T. Magazine
Weapons, Training and Tactics for the Real World
Join us at TFL or at AR15.com or on Facebook
Denny Hansen is offline  
Old October 24, 2001, 11:47 AM   #18
Long Path
Senior Member
 
Join Date: May 31, 1999
Location: N. Texas
Posts: 5,888
Back when I was a little kid...

...and Dad was shooting a bunch of IPSC matches, I used to get called out to the garage to help him reload .45 acp on his little RCBS single stage press. To move things along, he would put the case on the shellholder, actuate the lever, and I would remove the case. We'd move along pretty swooft like that. But remember that biofeedback thingy that labgrade was talking about? You don't have that with this method of reloading. Both of us got stuck or pinched once or twice.

So far, though, I've not managed to put a decapping pin through my finger. Just against it, rather hard.

Do be careful, won't you?

-L.P.
__________________
"Welcome to The Firing Line, a virtual community dedicated to the discussion and advancement of responsible firearms ownership."T.F.L. Policy Page
Will you, too, be one who stands in the gap? ____________ Better and Better, the blog. _____
Long Path is offline  
Old October 24, 2001, 10:14 PM   #19
swampgator
Senior Member
 
Join Date: October 14, 1999
Location: Gatorville, Florida
Posts: 619
In high school shop class, drilling holes in something (I don't remember), anyway the teacher asks me a question and I look over as I raise the drill.
Drilled a 1/4" bit through my left index finger. Missed both nail and bone. Mr Cable has this look of sheer panic and asks what I'm going to do.
I ask if this is a reversible drill?
Damn that hurt.
__________________
www.afn.org/~guns
swampgator is offline  
Old October 24, 2001, 11:49 PM   #20
Stephen A. Camp
Staff In Memoriam
 
Join Date: April 16, 1999
Posts: 2,570
Hello. Yes, I did that once years ago. Didn't go all the way through the finger, just to the bone. I've never repeated it for some reason! Best.
Stephen A. Camp is offline  
Old October 28, 2001, 09:27 PM   #21
bdhawk
Junior member
 
Join Date: December 22, 2000
Posts: 114
bad memories!!

yep, i impaled my fingernail with the deprimer pin and cut the other side of my finger with the brass. it also felt like i had smashed my finger, too. i am glad i wasn't in sunday school 'cause a couple of profanities slipped out (the air turned blue). i betcha it won't happen again.
bdhawk is offline  
Old October 30, 2001, 10:14 AM   #22
muzzletalk
Member
 
Join Date: January 3, 2001
Posts: 85
Nope not yet but then I have only been realoding for about 5 years... I sure it will happen sooner or later...
__________________
DVCE
dilegentia,vis,celeritas,eruditio
accuracy,power,speed,knowledge
muzzletalk is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11650 seconds with 7 queries