The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Hunt

Reply
 
Thread Tools
Old October 21, 2001, 09:34 AM   #1
MFH
Senior Member
 
Join Date: February 13, 2000
Posts: 122
Hornady 180gr HE 3006 on elk

We just returned from CO elk hunting. One of the members of our group shoots Horn. 180gr BTSP HE in his 3006. The accuracy is great and he used this load to take a cow a couple of years ago. This year, it was a med-lg bull angling toward him at about 130yds. First shot in the chest was lethal, penetrating back to the liver, but with no immediate effect. Another between the ribs did minimal damage. A third, struck the scapula at about 75yds and penetrated less than 1". A final shot broke the neck. I recovered three bullets and in every case the jacket separated and the lead fragmented severely. On the shoulder hit, only the flat of the scapula, no joint or heavy bone was hit. There was a 3.5"diameter radius of schrapnel damage and the jacket was right in the skin. Virtually no penetration whatsoever.On the frontal hit, there was severe superficial damage and only the jacket was found in the liver. I had heard of this type of poor performance but had never witnessed it. Thankfully, the bull was at a location to offer follow up shots. Has anyone else had any problems with the Horn HE loads? I'm not sure that I can now consider them as an option for elk. Had this been a longer range or larger animal, I would suspect we would have had a long, unsuccessful day of tracking.

MFH
MFH is offline  
Old October 21, 2001, 06:15 PM   #2
Cain R
Senior Member
 
Join Date: August 23, 2001
Location: Peoples Dominion of Kanada
Posts: 288
Pretty typical for boat tail Bullets. I've had similar results with most boat tail bullts as well. Best to stick with flat based well constructed bullets, like Hornady's Interlock, Nosler Partition, Swift A-Frame, etc. when hunting anything bigger than deer.
Cain R is offline  
Old October 21, 2001, 09:16 PM   #3
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,540
I'm sort of getting away from boat-tailed bullets on account of apparently-thinner jackets. My '06 handloads don't get quite the velocity of the Federal Premium High Energy (Sierra Gameking BTSP) but I've had blowups from the Sierra 150-grain BTSP. First I've heard of a blowup with the 180-grain.

Hmmm.

Art
__________________
You're from BATFE? Come right in! I use all your fine products!
Art Eatman is offline  
Old October 22, 2001, 11:16 AM   #4
Bottom Gun
Senior Member
 
Join Date: October 13, 1998
Location: Elgin, Arizona
Posts: 871
Cain R is right. I learned from personal experience (the hard way) that you need to use a premium bullet like a Partition, Swift, Barnes, etc for elk.
Elk are incredibly tough critters and require bullets that penetrate well each and every time.
I'd avoid boat tails, ballistic tips, and garden variety soft nose or hollow points. You'll most likely end up having to shoot more than once if you do. This is one area you shouldn't skimp to cut costs.
Bottom Gun is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06094 seconds with 7 queries