![]() |
|
|||||||
| Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
| Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
Junior Member
Join Date: September 16, 2001
Posts: 2
|
All hog hunters please read
What would the maximum range be to drop a hog with a .44mag Marlin lever action. Any good loads for this application, thank you for taking the time to read and please share your hog hunting experiences with the rest of us.
|
|
|
|
|
#2 |
|
Staff Lead
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 21,052
|
It's less the cartridge than the shooter. What is your reliable distance to hit a beer can, offhand? I'd call that your limit.
, Art
__________________
You're from BATFE? Come right in! I use all your fine products! |
|
|
|
|
#3 |
|
Senior Member
Join Date: July 5, 2001
Location: Smith Valley, Nevada
Posts: 177
|
Also depends a lot on the angle at which you can shoot. Going through the ribs at 90 degrees is obviously different than shooting a hog looking straight at you.
Having been charged, I'd also say it depends on where you are standing at the time. I had one come from about 150 yds and nearly reach me, despite two good chest hits (and two marginal hits) with a 338. Garrett, Buffalo Bore, and Cor Bon all make some real sledgehammer 44 loads. I've used the 320 gr. hardcast Cor Bons in a revolver with good results, but don't know whether the bullet length and shape would permit them to cycle well in a lever action rifle. If you haven't bought already, consider the Marlin levergun in 45-70. |
|
|
![]() |
| Thread Tools | |
|
|