The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 20, 2001, 05:16 PM   #1
branrot
Senior Member
 
Join Date: October 11, 1999
Location: Miami Beach, FL, USA
Posts: 1,367
Silver Colored Brass

After sorting the brass I picked up at the range, I found some that were obviously not brass, but bright silver in color (bright silver, not the dull silver aluminum Blazer stuff). Most of them were .357 and 10mm. What type of metal is this? Is it good to reload? Do you reload it the same way you'd reload brass colored brass? Thanks again for your help.
branrot is offline  
Old August 20, 2001, 05:23 PM   #2
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,549
That's nickel plated brass. The answer is yes to your other two questions. But be aware that it is a little harder on your dies than unplated brass. Although I haven't heard of anyone actually wearing out a die set using it, so that may be an OWT.
Mal H is offline  
Old August 20, 2001, 05:25 PM   #3
Wayward
Member
 
Join Date: November 18, 2000
Location: Texas
Posts: 79
Nickel plated brass. Some say that the nickel can flake and scratch your dies. This seems to be more a problem with steel dies than carbide ones.
Wayward is offline  
Old August 20, 2001, 09:46 PM   #4
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,243
Also be aware that you won't get as many reloads out of nickle-plated brass as just regular brass.

The two metals works at different rates, and a lot of stress builds up as they are shot and resized, leading to cracking.

I've always figured on between 5 and 10 fewer loadings, depending on the brass.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old August 22, 2001, 04:24 AM   #5
PreserveFreedom
Guest
 
Posts: n/a
I am not reloading yet, but I come here to try to pick up pointers for when I start (hopefully soon). I am real glad I saw this thread. I knew that nickel plated shells were reloadable, but I didn't know that they were less durable than plain old brass. If they are not as good as brass, why do so many premium companies use them? There are three things I can think of and these are just guesses so correct me if I am wrong...

1) The plating may make the shell more corrosion resistant and therefore more reliable for feeding and less apt to "rot out" and have a weak wall.

2) They may not stick in a chamber/cylinder as much because they are slicker, more corrosion resistant, and not as flexible.

3) They are pretty.
 
Old August 22, 2001, 06:19 AM   #6
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
Nickel Cases

1) corrosion resistance

2) increased lubricity for more reliable feed (autos) and/or easier extraction (both)

3) we'll go with 'pretty'
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06987 seconds with 7 queries