The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 16, 2001, 06:21 PM   #1
Lavan
Senior Member
 
Join Date: December 10, 1999
Location: California
Posts: 2,107
Remington 512 feed problem

I still have my first gun. I...think....it is the 512. It is a tube mag bolt .22 and old enough that they didn't even serial number em.

Well, I never abused it and it is still near mint. I...did...refinish the stock with hand rubbed oil and added sling swivels and it looks so fine as a "pretty" old gun.

But, it hangs up feeding cartridges from the tube. Only SOMETIMES.....aaargh. I see no galling or nicks on the carrier thingies that scissor up and down and have cleaned them and they seem to work just fine.

Any suggestions of where to look next?

Would like to give it to a grandson but really would like to get it working like new.

It seems to pick up the shell and then jam the nose back down and stick. Other times it works just fine.

???????
Lavan is offline  
Old July 17, 2001, 06:27 AM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Lavan, it just sounds like a worn part to me. I would try replacing the lifter/carrier. Numrich, www.e-gunparts.com, carries parts for this model. George
George Stringer is offline  
Old July 18, 2001, 12:19 AM   #3
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 2,973
I have been working on some brethren:
Rem 510 and 511.

I bought them at gun shows. I like to fix them up.

My best group is .2", 5 shots at 50 yards [typical 1" with that ammo].

I have had a real challange doing trigger jobs on them. They are easy to reblue. I have cast and re worked the butt plates.
Clark is online now  
Old July 19, 2001, 08:48 AM   #4
DAVID NANCARROW
Senior Member
 
Join Date: November 5, 2000
Location: TEXAS
Posts: 1,490
There is a screw adjustment on the port side of the weapon which will affect the feeding. IIRC, there are either 2 or 3 screws, and the one you'll want to adjust has stake marks on it. As old as it is, you may want to make the adjustment to where it functions correctly, then restake the screw so it doesn't back out on you.
DAVID NANCARROW is online now  
Old July 20, 2001, 01:44 PM   #5
Lavan
Senior Member
 
Join Date: December 10, 1999
Location: California
Posts: 2,107
I have egg on my face.....

...and probably in the gun too. Thanks all who responded.
David, I found the screw and adjusted it. Never knew what that screw was for. Could feel the changes and tried a few positions. But it suddenly changed its problem. Now it started not allowing the bolt to come all the way back. I could force it and override whatever was holding it.
I noticed a groove in the mag follower was empty and took the outer tube off to see if maybe a friction spring was jammed in there. Nope.
Finally, I looked into the action, saw nothing amiss and just out of frustration DRENCHED the action and the bolt in Liquid Wrench.

Presto.....gun fixed. Like new.

And I'm the guy who bought a Luger that was so jammed with old oil that the barrel had to be hammered with a wood block to free it up.

Never thought one of MY precious guns could gunk up. DUH!

Thanks all again.
Lavan is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07101 seconds with 7 queries