The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 13, 2001, 03:01 AM   #1
Mylhouse
Senior Member
 
Join Date: November 9, 1999
Location: Tempe, AZ
Posts: 444
Two-fold Dillon die question

Hey y'all-

Inquiring minds (well, at least mine) want to know:

1) I've heard that Dillon dies are actually made by Redding. Is this true?

2) I've been hearing GREAT things about the Redding Profile Crimp die for revolvers. Dillon calls their revolver crimp die the "ACCU-CRIMP" die. The tech at Dillon, who wasn't very helpful (believe it or not...guess there's a first time for everything), said that "it was the best crimp die available and probably works much in the same way as the Redding Profile Crimp." Is this true, is the Dillon as good as the Redding, and do they crimp in the same manner?

Thanks!
__________________
"Trust me...I know what
I'm doing..."
Sledgehammer
Mylhouse is offline  
Old June 13, 2001, 08:24 AM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
1) Ask Dillon

2) No, the Reding die is superior (tested)
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old June 13, 2001, 08:40 AM   #3
Mylhouse
Senior Member
 
Join Date: November 9, 1999
Location: Tempe, AZ
Posts: 444
I DID ask Dillon

And the guy didn't know the answer to question 1!!!
__________________
"Trust me...I know what
I'm doing..."
Sledgehammer
Mylhouse is offline  
Old June 13, 2001, 12:09 PM   #4
renaissance7697
Senior Member
 
Join Date: January 14, 2001
Location: Alexandria, VA
Posts: 203
For We Shoot2

I have been using the Lee Factory Crimp Dies ( FCD ) in .45acp, 38spl, and 9mm.

I actually use them more for the "After Seating > Case Resizing" feature built in to the FCD than the crimp itself.

(I sometimes have a problem with the finished cartridges "bulging" just below the base of the seated bullet, after Seating the bullet.
Running the finished cartridge through the FCD after seating the bullet cures the problems 100%)

Do the Reding Dies have a resizing feature like the Lee?

It is a disappointment to me that Lee does not make a FCD for .32 ACP.
Does Reding?
renaissance7697 is offline  
Old June 13, 2001, 12:27 PM   #5
Intel6
Senior Member
 
Join Date: October 13, 2000
Posts: 425
I don't know about Reddding making the Dillon dies. I really don't think they do since there are zero similarities between the two. I can't see a company that makes dies making a completly different die, why fix it if it ain't broke? If they did make them I would think they would have some similarities.

I do know that Dillon used to sell Redding dies for caliber's that they didn't have in their own brand dies. I think they still do that with some of the rifle caliber's they offer. That might be where the idea that Redding made their dies.

Mike Dillon isn't stupid and knows a good thing when he sees it. The Redding Profile crimp has proven itself and he was smart enough to use a similar crimp. Calling it an "accu crimp" tells me it is "similar" to the Profile Crimp and not exactly a "Profile Crimp."

As far as which is better, I only use real Redding PC's and have found them to be the best.
Intel6 is offline  
Old June 14, 2001, 06:26 PM   #6
Patrick Graham
Junior member
 
Join Date: January 18, 1999
Location: Kokomo, Indiana USA
Posts: 674


Once I started using lee factory Crimp dies in my Dillion 550 I stopped using all my other crimp dies including my beautiful redding crimp dies.

I haven't had any jams since I started using them.
Patrick Graham is offline  
Old March 22, 2005, 08:33 PM   #7
Dead-Nuts-Zero
Senior Member
 
Join Date: August 26, 2004
Posts: 498
I hope this question fits into this thread. If not, I will go somewhere else and ask. So for now, my question is on the Redding crimping dies.

I purchased two of them .380 and .40 and after having them awhile, I decided to get them out and set them up. It is then that I saw that I had something different than I thought I had bought. Maybe this is why I got them for 10 bucks new unused. :barf:

These crimpers do a taper crimp, then finished with a roll crimp. Are all Redding crimp dies of this style? I thought I was getting a taper only as it was for .380 and .40 rounds. Everything I read in the books like Lyman and Speer etc. tell me that you Never use a roll crimp for .380 and .40 unless there is a canilure ring to crimp into. And, well I don't see where I will be able to use these dies.

Does anyone know if the roll crimp is possibly so very slight, that it can be used? The instructions are quite brief and every time I think about calling Redding, it's a sunday afternoon or a week night when they are not availible. Someday I will remember to call them. I am kinda hoping that I can adjust out the roll part and just use the taper. I bought them because of the great reputation of their dies and many have said they use them to finish out a load. So I thought I found a good buy. Maybe not!

I am hoping that if the taper tightens up the bullet, that maybe the very slightest little roll will give me a better seal and not effect headspace etc. giving me a superior load.

What are you Redding users able to tell me about this?

Thanks, and as always, I hope to find several good answers and get my help right here on the FL Forum.

Dead-Nuts-Zero is offline  
Old March 23, 2005, 12:00 AM   #8
G56
Senior Member
 
Join Date: June 10, 2004
Location: Oklahoma
Posts: 302
Quote:
1) I've heard that Dillon dies are actually made by Redding. Is this true?
I seriously doubt that, they have nothing in common that I can see.

In most cases...when a company gets their product manufactured by another company, 99.9% of the time it is easily detected by a close look.
__________________
John
G56 is offline  
Old March 23, 2005, 09:10 AM   #9
Russ5924
Senior Member
 
Join Date: February 18, 2005
Posts: 1,874
Me to, all I use is the Lee dies.Why should I buy the Dillon when you can get 2 sets of Lee dies for the same price. But do like ther e press
__________________
Russ5924
Russ5924 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08391 seconds with 7 queries