The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools
Old June 11, 2001, 09:31 PM   #1
Senior Member
Join Date: March 18, 1999
Posts: 132
Mr. Stringer...can I replace....

Sir, I have a Winchester model 70 Stealth in 308.
I was wondering, can I replace the slotted screws on the trigger guard with the same type that is on
my Remington PSS that allows for tightening to 65
inch lbs? Thanks
ursus is offline  
Old June 12, 2001, 07:18 AM   #2
Senior Member
Join Date: March 9, 2001
Location: Greenwood, SC
Posts: 821
I'm not George, but I'll jump in. Brownells sells sets of guard screws for the Model 70 in a socket head configuration. They tighten with a 5/32 Allen wrench, and you can really lean on them if you are so inclined. Stock number is 122-505-670.
Clemson is offline  
Old June 12, 2001, 07:20 AM   #3
George Stringer
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Ursus, you can get that with regular slotted screws but socket head screws are available for the Model 70. You can get them from me or Brownells. I don't charge as much to ship and they are also available from B-Square. George
George Stringer is offline  
Old June 12, 2001, 08:52 PM   #4
Senior Member
Join Date: March 18, 1999
Posts: 132
Thank you gentlemen.
ursus is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 12:32 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04735 seconds with 7 queries