The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 12, 2001, 08:54 PM   #1
HowardK
Senior Member
 
Join Date: December 21, 1999
Posts: 100
I'm looking for a good IPSC/IDPA load (a PF of about 170) for a 230 gr. lead bullet (actually it's a Precision polymer coated bullet) and VV N340. Thanks in advance.
HowardK is offline  
Old May 12, 2001, 10:32 PM   #2
JohnK
Senior Member
 
Join Date: May 12, 2001
Location: Duvall, Wa
Posts: 552
N340

According to Vihtavuori:
45 acp 230gr FMJ-RN Hornady N340 6.8gr 974fps 1.26OAL

They don't list data specifically for lead bullets but since lead usually shoots faster than jacketed with the same powder charge this should be just what you're looking for. I'd start at 6.5gr with the LRN and work up or down from there as needed.


John
http://www.handloads.com

JohnK is offline  
Old May 13, 2001, 12:22 AM   #3
char923
Senior Member
 
Join Date: February 18, 2000
Location: Anchorage AK
Posts: 237
One of my match load for IPSC useing 230gr RN hard cast and 6.0gr of N340 1.260 OAL Chrony at 816 FPS, that a PF of 187.6
My main IPSC load is 200gr SWC hard cast 6.7gr of N340 1.250 OAL.,it Chrony at 880 FPS, the PF is 176
char923 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06639 seconds with 9 queries