The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 13, 2001, 06:57 PM   #26
Joe Portale
Senior Member
 
Join Date: June 8, 1999
Location: Tucson, Arizona Territory
Posts: 715
Does running the chrony over with a truck count? I did that. Yep, it was in front of a whole bunch of people. And yes, I was embarrassed.
__________________
Joe Portale
Tucson, Arizona Territory


"Even now in heaven there are angles carrying savage weapons".
- St Paul
Joe Portale is offline  
Old May 13, 2001, 11:08 PM   #27
Southla1
Member In Memoriam
 
Join Date: March 19, 2000
Location: Jeanerette, La. Near the
Posts: 1,999
Sure it counts Joe. I had a friend of mine from Baton Rouge come out of the woods one day.....unload his BAR 7MM Mag. with the VERY expensive Redfield scope, lean said rig against the front right side of his 4X4. Later he got ready to drive off and you guessed it.......forgot the rifle there and it fell and he backed over it. We looked at it and it looked OK. The ground was soft and there was a perfect imprint of that rifle and scope in the ground. I advised him to take the rifle to a smitty even though it "looked ok", I figured the barrel may be bent. Rifle was not OK. Barrel was not bent, action was. Totaled. Scope was OK though.
Southla1 is offline  
Old May 16, 2001, 05:02 PM   #28
HandCannon
Junior Member
 
Join Date: May 15, 2001
Posts: 14
Wounded my Pact with a 50AE slug from my Freedom Arms revolver. I'm not sure which was damaged more, the chrono or my wrist.
HandCannon is offline  
Old May 17, 2001, 07:53 AM   #29
pahrumpcaveman
Member
 
Join Date: December 1, 2000
Location: pahrump,nevada
Posts: 65
I tore one up with a 454 casull. Got the flinches ya know.
pahrumpcaveman is offline  
Old May 17, 2001, 10:35 AM   #30
parachuterigger
Member
 
Join Date: May 17, 2001
Location: Richmond, IN
Posts: 27
Got a bad case of the flinches one time and put a 150gr SWC right in the middle of one of the screen stand wires on my Chrony. Bent it right in half, but the unit still worked after I tightened the bolts which shook loose.
parachuterigger is offline  
Old May 17, 2001, 11:00 AM   #31
Alleycat
Member
 
Join Date: April 24, 2001
Posts: 90
OK you guys...here's a coupla tips to help keep your chronos operational, but we're not gonna talk about how I learned 'em...

1. (this is posted earlier but bears repeating) REplace your diffuser rods with wood dowels, the lighter the better. This prevents the destruction of the chrony through hitting the rods.

2. Turn your chronograph sideways! I do a lot of evening testing, and discovered that if I set up a white background (IPSC target, posterboard, etc) so that it's in full light, and then point the chronograph sideways at it, I get better, more consistent results. Take the diffusers off (folks, the skyscreens are the receptors in the BOTTOM of the chronograph--the plastic thingies are the DIFFUSERS) but leave the dowels in to define your shooting area. This takes care of the flinch that takes out the sensors--you might get a dowel, but that's all. This works great for all chronographs that depend on available light--the white background gives good contrast for the chrono to "see" the bullet pass.

3. Set up a target.

Good luck!

Steve
Alleycat is offline  
Old May 18, 2001, 12:13 AM   #32
Chuck R
Junior Member
 
Join Date: May 17, 2001
Location: Western PA
Posts: 6
It was actually educational. I had (20 yrs ago) a chronograph the skyscreens for which were mounted in 3"x3"x4" aluminum boxes, with a transverse slit in the top surface for sensing. Of course it was really finicky about registering the passage of a bullet sometimes which had the effect of encouraging the shooter to shoot very close to the top of the box in order to get a reading. I shot a bit too close with a .303 Enfield one day and plugged the box from the TOP. Instead of ricocheting off, the friction between the gilding metal bullet jacket and the aluminum pulled the bullet DOWN into the box, starting as a slight graze, but within around 2" of travel, the bullet penetrated the box and came out the END of the box. The circuit board and just about everything inside the box was covered with a fine mostly transparent coating of vaporized aluminum. I cleaned it up, picking the aluminum layer off the circuit board which was otherwise undamaged and covered the holes in the box with opaque tape. It still worked. A year or so later I did it again and this time killed it for good. The company was out of business by then so I did what I should have done in the beginning, and bought an Oehler.
Chuck R is offline  
Old May 18, 2001, 01:51 PM   #33
Reloader
Senior Member
 
Join Date: December 29, 1998
Location: Onalaska Tx, USA
Posts: 116
Shot twice by acquaintences.......one .22 LR throught the guts, and repaired, before I even got to shoot it. Next friend shot off the sky bars with first two shots. He paid for the replacement.
Reloader is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07534 seconds with 7 queries