The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 17, 2001, 03:18 AM   #1
marks
Junior Member
 
Join Date: March 17, 2001
Location: fairbanks, alaska
Posts: 12
For neck sizing only for my 25-06 and .300 Win mag, how do the Lee collet dies compare with Redding bushing style dies or any of the other neck size dies?

I think I will try crimping for rifle and pistol in a separate step from seating. Are the Lee factory crimp dies the ticket?

Do the RCBS X dies truly limit growth enough to eliminate the need to trim? If so I might like to use them for .223.
Any thoughts?
marks is offline  
Old April 17, 2001, 02:54 PM   #2
muzzletalk
Member
 
Join Date: January 3, 2001
Posts: 85
IMHO, there is no comparing the RCBS dies to the LEE dies. RCBS dies have the quality. LEE dies will do the work but... I would pay the extra 20 bucks for the RCBS dies.
muzzletalk is offline  
Old April 17, 2001, 03:27 PM   #3
JNewhouse
Member
 
Join Date: April 30, 2000
Location: Anaheim CA USA
Posts: 41
RCBS vs. Lee

BAH!
JNewhouse is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06750 seconds with 9 queries