The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 18, 2001, 04:42 PM   #1
45Colt
Member
 
Join Date: December 2, 2000
Posts: 60
Any one loading 45 +p using W231 powder? If so, what are your loads and what velocities are you getting? I load Rainier 200gr hp over 6.2 to 6.5 grs W231 in Starline +p brass. I get 950-972fps. Any other loaders using W231 in this context? Thanks, Walt
45Colt is offline  
Old March 18, 2001, 09:03 PM   #2
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,116
230 FMJ with 6.5 Unique for about 850 fps or 6.3 of H. Universal for about 840.

230 Lead RN with 5.5 of 231 for 820. I use 5.3 for about 800. Pleasant to shoot but still does in the steel plates.

None of these are super hot loads, but you'll know you're shooting a "real" .45.

Best,
Johnny

MOLON LABE!
__________________
MOLON LABE!
Amendment II ensures the rest of the Bill of Rights.

Blog: Expert Witness
Johnny Guest is offline  
Old March 20, 2001, 02:41 PM   #3
Desert Dog
Senior Member
 
Join Date: September 22, 1999
Location: Dallas, TX
Posts: 473
I tried a few W231 loads before I moved up to slower powders to limit the pressure peak strain on the pistol. My favorite +p powders are AA#5 and AA#7. HS6 and HS7 are also supposed to be good. Ramshot Enforcer and Alliant Power Pistol are also worthy candidates.

BTW, don't go over 7.0 grains of 231 in a .45 case. The pressure peak is like 30,000 psi at that charge weight.

YMMV,
__________________
.45 Super... Fat and FAST... but for real firepower, .45 Blackhawk!

Yes, in fact I do have a 454... in more ways than one.

"No provision in our Constitution ought to be dearer to man than that which protects the rights of conscience against the enterprises of the civil authority" - Thomas Jefferson
Desert Dog is offline  
Old March 24, 2001, 09:09 PM   #4
WalterGAII
Junior member
 
Join Date: November 7, 1999
Posts: 1,516
I just chrony'd some 230gr. Golden Sabers @1220+ fps. 13.9gr. ##7, CCI lmpp. Oh, be sure and use .45 Super brass!
WalterGAII is offline  
Old March 25, 2001, 10:48 AM   #5
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,139
NO!!!!!!!!!!!

Suggest correct 45ACP +P powder as Alliant Power Pistol (they even offer data).

W231 is tooooo fast. Danger.

(I was once testing 230g/W231/45ACP +P and as I added powder velocity DID NOT change. Know what that means? LOL...)
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old March 25, 2001, 02:38 PM   #6
WalterGAII
Junior member
 
Join Date: November 7, 1999
Posts: 1,516
Time to start counting your fingers??
WalterGAII is offline  
Old March 26, 2001, 06:27 AM   #7
dewey
Senior Member
 
Join Date: December 22, 1999
Location: South East
Posts: 399
AGREE+++ 231 is NOT a good choice +++

I have used Unique and 2400(for 250grn and up) with very good results. Both give very good accuracy out of any of my S&W revos but the M25-2 is the pickest of the group. The
newer M625 will soot ANYTHING in on hole out to 35 to 40 yards.....dewey
__________________
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

...and He will come again . . . SOON !
dewey is offline  
Old March 26, 2001, 11:37 PM   #8
colorado
Member
 
Join Date: February 4, 2001
Posts: 78
45 Super

Been shooting 12 g. of AA#7 in front of 230g. golden Sabres in my P90. Estimated velocity at 1000 fps. Just got my Chrony, based on post of 13.9 g. at 1200 fps looking forward to chronographing my load. Very accurate using 45 Super brass and upgraded recoil/firing pin springs...
colorado is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08178 seconds with 9 queries