The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 17, 2001, 07:19 PM   #1
Berthold
Member
 
Join Date: February 15, 2001
Posts: 21
I want to do some of my own work, Whats a dremel model?
Berthold is offline  
Old March 17, 2001, 10:32 PM   #2
UK2TX
Senior Member
 
Join Date: November 12, 2000
Location: Austin,TX
Posts: 274
A gunsmiths nightmare and a dealers dream!
UK2TX is offline  
Old March 17, 2001, 11:54 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 20,015
Caution: More guns have been ruined with a Dremel tool than with any amount of shooting. I have a fair amount of experience and yet I have had them get away and ruin parts. I recommend working with old pieces of metal and scrap parts before tackling anything important.

Of course, no one ever takes my advice.

Jim
James K is offline  
Old March 18, 2001, 08:07 AM   #4
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Berthold, dremels can be useful but I'd spend that money on some good files instead. George
George Stringer is offline  
Old March 18, 2001, 01:03 PM   #5
johnwill
Senior Member
 
Join Date: April 6, 2000
Location: PA
Posts: 3,451
When you buy your Dremel tool, make sure you don't buy any grinding wheels. Just use it for polishing things until you really get the hang of it. FWIW, It's the greatest gadget for doing things like polishing feed ramps, but the grinding wheels can destroy a gun faster than you can imagine!
johnwill is offline  
Old March 18, 2001, 06:06 PM   #6
Badger Arms
Senior Member
 
Join Date: July 2, 2000
Location: Harnett County, NC
Posts: 1,689
Bad Dremmel, BAD!

I agree with the other's. Your more likely to do damage than anything else with a Dremmel. Stick with polishing strictly on guns and nothing else. A good set of needle files, some very fine sandpaper, and some jeweler's Rogue are all that's required in most cases. Polishing the feed ramp is one of a few jobs that I feel it's necessary to have the Dremmel for. That should take you a while to do and you should be careful not to remove too much. NEVER GRIND with the Dremmel.

That having been said, I prefer the large, variable speed one that plugs in. The rechargeable ones are simply too annoying.
Badger Arms is offline  
Old March 20, 2001, 02:30 AM   #7
Ken Cook
Senior Member
 
Join Date: March 4, 1999
Location: Hot Springs AR. USA
Posts: 265
Yup, like everyone else, BAD! YUCK! EVIL! NASTY!
but then again,
forget dremel and do a websearch on Foredom tools. They make Dremels look like something from Fischer Price!

My one serious caveat?
It's much easier to take metal off than to put it back.
(Trust me, I know!)
__________________
On Target Indoor Firing Range
Hot Springs, Arkansas
Semper Fi and Molon Labe!
Ken Cook is offline  
Old March 20, 2001, 08:59 AM   #8
BBBBill
Senior Member
 
Join Date: January 5, 2000
Location: Alabama
Posts: 197
What they all said...But when you do buy one (and I know you will ), get one of the top of the line models like the 395. Get a flex shaft and hanger also. 'Course if you got the money, a Foredom is better. Be very, very careful...and have fun.
BBBBill is offline  
Old March 20, 2001, 01:24 PM   #9
Redlg155
Senior Member
 
Join Date: March 13, 2001
Location: NW Florida
Posts: 2,307
If ya absolutely gotta musta I can't stand it mama I just gotta have one, I would suggest the models with the flexible adjustment and variable speed.

Get the best one you can afford because when you ruin a good gun you will retire your dremel tool to polishing jobs and duck carving. Slow and easy is the way to go, file a bit, check the fit, file a bit, check the fit...

But then they are ok for bobbing a hammer spur.

Good Shooting
Red.
Ps..when ya get a new gun cause you ground the old one into powder...get a glock, you won't need any tools except a punch!
Redlg155 is offline  
Old March 20, 2001, 10:30 PM   #10
WalterGAII
Junior member
 
Join Date: November 7, 1999
Posts: 1,516
I bought the kit from Sams that has the variable speed with the flexible shaft and the rechargeable unit, plus a bunch of attachments for $89.95.

I use the felt wheel attachment with Simichrome to polish trigger assemblies and feed ramps on my Glocks. Also have used the drum sander for free-floating a couple of rifle stocks.

I don't do any metal grinding with my Dremels, but then, I have Glocks and probably will never need to do any grinding.
WalterGAII is offline  
Old March 21, 2001, 10:31 PM   #11
Keith J
Senior Member
 
Join Date: December 15, 2000
Posts: 469
Not for gun work (except polishing)

I use mine for general housework, from polishing to chainsaw sharpening. I think the only time I've ever used it was in polishing the feed ramp on a 1911 and de-leading a chamber (felt rod with red rouge).

I use a spherical burr to remove the primer crimp from military cases. It only takes a second for each case (3/16" for small and 1/4" for large).

The one thing its perfect for is cutting bicycle shifter/brake cable. Just silver solder where you want to cut and use the cut-off wheel. Deburr and polish so the cable end can be run through the casing.
Keith J is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07990 seconds with 7 queries