The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old February 24, 2001, 02:28 PM   #1
faiello5
Guest
 
Posts: n/a
Hi all. Don't have a chrono, so I must ask here. About how many grains of powder do I need to make the IDPA power factor of 165 from a 5" 1911. I am using W231 with Winchester primers and a 200g LSWC bullet. OAL is 1.255 & crimp is .469. Thanks.

Regards,
Frank
 
Old February 24, 2001, 07:23 PM   #2
Scooter2
Senior Member
 
Join Date: January 16, 2001
Posts: 115
It depends. W231 powder is temperature sensitive. In the summer, I'll make 170 pf with 5.5 gr., but during the winter I need to bump it up to 5.7 gr. So 5.7 should work. I load mine to 170 just to be on the safe side of the pf.
Scooter2 is offline  
Old February 24, 2001, 09:45 PM   #3
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 13,914
5.7g is safe (but the ONLY way to really know is to chrono).
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06027 seconds with 7 queries