The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old February 19, 2001, 06:10 PM   #26
VictorLouis
Senior Member
 
Join Date: January 12, 2000
Location: Arizona
Posts: 2,292
I do appreciate that, Dave. The shopkeeper where I purchased it is going to have his 'smith rectify it. No charge, as I bought it from him. I asked him to call with the charge for converting the lifter to an anti-jamb(flex-tab?) style while he is at it. Do you know what a reasonable fee for that should be?
VictorLouis is offline  
Old February 19, 2001, 08:19 PM   #27
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
'Fraid not, Vic, I'm out of the loop these days. And, the smith that did mine was/is a friend.

Best guess, $50-75, but it is a guess.

One thing on the Flextab, when I had it done, it was this same smith/friend that recommended it. At that point, after thousands of rounds, I had never had the problem of losing a round behind the carrier. Proper technique....



Dave McC is offline  
Old March 29, 2007, 10:14 AM   #28
phm14
Junior Member
 
Join Date: February 28, 2007
Location: Houston, TX
Posts: 6
Love my M1S90

I've had this gun for 10-12 years. 18" bbl w extended mag. I've put lots of cheap remmy heavy dove loads though it @ the sporting clay range, as well as slugs and buckshot from varios makers with not a single hiccup, and I don't clean it very often. This gun has the PG stock and wears a butt cuff. I have several other 12g shotguns, including an 18" 870 and an old A-5. I completely trust the reliabilty of the M1-my favorite shooter hands down
phm14 is offline  
Old March 29, 2007, 10:23 AM   #29
Smitty in CT
Senior Member
 
Join Date: August 30, 2006
Location: Moodus, CT
Posts: 589
Mossberg has a new version of their 930



Not a lot of $$ and a great reliable gun.

The mag extensions for the 9200 Jungle Gun fit on the 930, too!!!
__________________
Smitty

"The object of war is not to die for your country, but to make the other bastard die for his." -- Gen. George Patton
Smitty in CT is offline  
Old March 5, 2011, 05:43 PM   #30
silverrado58
Member
 
Join Date: January 26, 2011
Location: West Palm Beach, FL.
Posts: 25
You couldn't give me a Mossberg anything, I owned 2 Model 500's
As the raven said "Nevermore, Nevermore"! Posted the long story on another forum, will copy and paste here, as Arnold said "I'll Be Back"

Ok I'm back, here is the other post;

You couldn't give me a brand new Mossberg, owened one years ago, actually two of them one was a 20 ga. Model 500 did not have it long, say about a day. I bought it a K-Mart took it to the range, loaded it up, and the carrier would not bring the shells up high enough to allow the bolt to push the shells into the chamber. It went back to K-Mart, and since they didn't have another to replace it they gave me my money back. The next one I purchased, a couple years later was also a Model 500, but this time in 12 ga. Had it for awhile until one day while at the range I guess I racked the slide a a little too hard, (is that possible with a shotgun)???????????? Hmmm!!!!! Never seemed to happen with my Winchester Model 1300 Defender,(still have it) and no I was not doing a verticial rack like you see in the movies. Well anyway back to what happened to the Mossberg, it jammed up tight with a live shell half way into the chamber. Could not move the slide forward or back, and since I didn't have any tools with me, I had take it home in that condition. At home I found out what the problem was, a Torsion Spring that had one of its legs fall out of place and jammed up the trigger mechanism. There was nothing there to hold that leg in place, no cut out, nothing but the tension. I was totally amazed at this design flaw. Oh lets not forget about that cheap POS tang safety that seems to be broken on just about every Mossberg I've seen that is not brand new.

Last edited by silverrado58; March 5, 2011 at 05:53 PM.
silverrado58 is offline  
Old March 5, 2011, 09:54 PM   #31
zip22
Member
 
Join Date: April 29, 2009
Posts: 99
You dug up a 10 year old thread about automatic shotguns to post about your bad experience with two pumps?
zip22 is offline  
Old March 5, 2011, 10:31 PM   #32
chasep255
Senior Member
 
Join Date: December 21, 2009
Location: NJ :(
Posts: 688
I don't know too much about shotguns but maybe the Saiga 12.
__________________
I have mostly non-sporting firearms
In NJ, technically speaking, ALL guns are illegal
Also in my state there is such thing as a Class III BB gun :barf:
Happy to say that despite the NJ AWB I still manage to make my guns look scary
chasep255 is offline  
Old March 5, 2011, 10:32 PM   #33
chasep255
Senior Member
 
Join Date: December 21, 2009
Location: NJ :(
Posts: 688
Wow, I didn't realise that I just tried to answer an 12 year old question.
__________________
I have mostly non-sporting firearms
In NJ, technically speaking, ALL guns are illegal
Also in my state there is such thing as a Class III BB gun :barf:
Happy to say that despite the NJ AWB I still manage to make my guns look scary
chasep255 is offline  
Old March 6, 2011, 05:16 AM   #34
silverrado58
Member
 
Join Date: January 26, 2011
Location: West Palm Beach, FL.
Posts: 25
I was looking for something else when I just happen to stumble upon it, wasn't paying attention to the date, just the subject. I don't know why everybody gets weirded out about posting on an old thread. People still read them, I did, and SO DID YOU!!
Just because a thread is old, doesn't mean you can't pick up valuable info from it. And if me posting a bad experience on an old thread, will save somebody from making a bad decision in the choice of a crappy firearm, then so be it, I will post all they way back to windows 95, or until a moderator closes it. So lets just say that a good majority of the people in these fourms, don't want to read old threads, then all I got say to them is, don't, and move on. I'll bet that I'm not the only that reads them. Now that I said my piece, HAVE A WONDERFUL DAY!
silverrado58 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08482 seconds with 7 queries