The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old January 23, 2014, 01:01 AM   #1
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Posts: 1,774
Whether to stain a first gun rack? Light pine.

There is finally a rack for the fourteen rifles: SKS, Enfields, FR8, Mauser, Garands. At age 58, a very late bloomer for this.

Even though reddish-brown or medium (etc) brown wood is very attractive, in a small hobby room with white walls, do you find that a white or beige color on the rack creates a nice contrast to the numerous brown or yellowish colors of the guns' wood and stains?

This white pine -from Loew's- at first glance gives the impression that the milsurps stand upright by themselves, with all the metal, wood and green/beige slings very clear and sharp.
Would white paint to match the walls highlight them the best?
Ignition Override is offline  
Old January 23, 2014, 01:06 AM   #2
tahunua001
Senior Member
 
Join Date: July 21, 2011
Location: Idaho
Posts: 6,002
if you were an american gun nut I would suggest walnut, it'd match all of the stocks.. however since you have such a mix I would suggest a more decorative cherry.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar.
I never said half the crap people said I did-Albert Einstein
You can't believe everything you read on the internet-Benjamin Franklin
Bean counters told me I couldn't fire a man for being in a wheelchair, did it anyway. Ramps are expensive.-Cave Johnson.
tahunua001 is offline  
Old January 23, 2014, 08:17 AM   #3
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS (new to MS)
Posts: 4,729
Since the rack is pine, you are going to need to pay very particular attention to the type of stain you use. Pine does not like to stain well. It wants to absorb stain unevenly. You can mitigate this by using a pre-stain conditioner and then using a gel based stain.
Doyle is online now  
Old January 23, 2014, 08:52 AM   #4
gyvel
Senior Member
 
Join Date: August 30, 2009
Location: Northern AZ
Posts: 5,229
An attractive technique on knotty pine is to carefully run a propane or blow torch with a spreader tip lightly and quickly over the wood. This brings out the knots and grain in contrast to the wood. I've seen it done on knotty pine wood paneling and the result is very attractive and "rustic."

Last edited by gyvel; January 23, 2014 at 10:34 AM.
gyvel is offline  
Old January 24, 2014, 07:01 PM   #5
kilimanjaro
Senior Member
 
Join Date: November 23, 2009
Posts: 1,810
If you want a deep, rich stain on pine wood, you can do it, but plan it out. Buy a quart of your desired stain, the oldest one on the shelf. Do not shake, turn over, or disturb the contents. Take it home and let sit for a week. The stain pigments should be settled in the bottom of the can. Gently pour off the oils in the top half of the can.

Clean the wood with a tack cloth.

Stir the remaining liquor and spread evenly on the wood with a sponge brush. Let it soak in for 10 minutes, then wipe off with clean rags. Repeat if necessary.
kilimanjaro is offline  
Old January 27, 2014, 01:44 AM   #6
Ignition Override
Senior Member
 
Join Date: February 18, 2008
Posts: 1,774
Thanks very much.
Ignition Override is offline  
Old January 27, 2014, 03:03 AM   #7
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 4,261
I want to keep my guns. So they are not in a wooden rack of any color. They are kept in a safe, bolted to the floor of a secured, and alarmed room. The steel security door itself "camoflaged" by a clothes rack in the back of a laundry/storage room.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old January 27, 2014, 11:58 AM   #8
DaleA
Senior Member
 
Join Date: September 12, 2002
Location: Twin Cities, MN
Posts: 1,541
Just be aware that woodworking like gun ownership can take over all your free time and money

Last edited by DaleA; January 27, 2014 at 12:25 PM.
DaleA is offline  
Old January 27, 2014, 12:16 PM   #9
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 3,024
Out of the box thought.
Try this stuff instead of either a dark stain or white paint.
http://www.oldenglishpolish.com/sf2_scratch.shtml
Its a penetrating hardened when dry oil type finish I've used to great effect with several pieces of light colored wood. Get the pair (usually at Home Despot/Lowes), start with the light on a scrap test & add a little dark (in a separate container so you don't mess up the original "light") until you get just the degree of color you want.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”?

Elderly Hunter: “That's dashed unsporting. Probably Belgium.”
wogpotter is offline  
Old January 27, 2014, 04:20 PM   #10
KeeperOath
Member
 
Join Date: December 24, 2013
Posts: 50
Staining Wood:

White Pine stains well. I've used that wood for many of my custom made furniture pieces. Yellow Pine will not work very well. I think a Painted Yellow Pine gun rack will work also. I have many black painted furniture in my Man-Cave. When the black turns white, I know to dust. ;>)
KeeperOath is offline  
Old January 30, 2014, 11:26 AM   #11
csmsss
Senior Member
 
Join Date: October 24, 2008
Location: Orange, TX
Posts: 2,986
Pine stains well? Really? That isn't my experience. Pine is a very porous, open grain wood with conspicuous pattern - basically that makes for very uneven staining.

If you do decide to stain this rack (personally, I'd paint it), be sure to sand it well and then use a good sanding sealer before staining. Otherwise it's going to be very splotchy and look like 60's fake "wood" paneling.
csmsss is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07825 seconds with 7 queries