The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old December 28, 2013, 11:10 PM   #1
Famas
Senior Member
 
Join Date: December 5, 2009
Location: French, currently living in US
Posts: 126
AR customizing dangers?

Hello - I've often thought about building my own AR. As many of you are very well aware, there seems to be a plethora of parts and assemblies one can choose from, either through gun show dealers and/or catalogues. I've seen many U-yube videos of AR failures, either feeding or some explosion of some kind. I see a lot of magazines being blown out.

My question is this: Does overly customizing a personal build lead to a dangerous situation? I would assume all part from various manufacturers have built to specs and are mostly interchangeable, but I've often wondered if personal build ARs are "untested" as compared to those manufactured by known gun makers...having been thoroughly tested before releasing to the general market.

Any thoughts on if whether or not a personal custom build is a more risky approach....and why? What I should watch do or not do when building my own AR? Thank you.
Famas is offline  
Old December 29, 2013, 01:16 AM   #2
Quentin2
Senior Member
 
Join Date: June 18, 2009
Location: NorthWest USA
Posts: 1,640
If you choose quality parts and are careful during assembly you don't have much to worry about, it's not difficult to build a better rifle than the cheap ARs that litter most gun shops. Just know what you want and buy quality. Kabooms are rare and feeding problems aren't likely unless you buy inferior parts or magazines.

Most people buy a preassembled upper unless they want to invest in the necessary tools. The lower receiver is not hard to assemble using common tools.
Quentin2 is offline  
Old December 29, 2013, 08:38 AM   #3
Ibmikey
Senior Member
 
Join Date: June 1, 2013
Location: Medical Lake Wa.
Posts: 620
The only "dangerous" situation I can think of is improper headspace. Although having completed many rifles using quality parts this has not been an issue, by design new barrels and bolts just work. The Field gauge given me years ago by the M-16 maintenance unit at a nearby base has yet to allow a bolt to close on it.
As Quentin offered "quality" is the key, if concerned you can have a bolt head spaced by the barrel manufacturer when purchasing. Properly torque the nut and you are good to go.
Ibmikey is offline  
Old December 29, 2013, 11:58 AM   #4
Famas
Senior Member
 
Join Date: December 5, 2009
Location: French, currently living in US
Posts: 126
Ok, good advice so far. I'm intrigued by the quality factor. I must admit, being new to the world of AR build, I naively imagined all parts were more or less of the same quality. So then this leads to my next obvious question....what brands should I avoid? Are some names good with certain part and bad with others, or are they simply universally bad and good? Thank you.
Famas is offline  
Old December 29, 2013, 01:50 PM   #5
CTS
Senior Member
 
Join Date: November 6, 2011
Location: NE Georgia
Posts: 1,070
Common sense prevails. I recently saw a guy complaining abut a BCG he had bought that came apart when he fired it the first time because he noticed that it didn't have a cam pin installed but assumed that it was a new design that didn't call for one. LMAO. Lucky the guy still had all his fingers and eyballs. Had an out of battery experience.
__________________
01 FFL, NRA, NAGR, GOA.
CTS is offline  
Old December 29, 2013, 02:12 PM   #6
Ritz
Senior Member
 
Join Date: January 18, 2013
Location: Virginia
Posts: 245
Re: no cam pin

LOL.

If you're reasonably careful during assembly and only buy from quality suppliers, there isn't a whole lot to worry about.

Personally, since I've already got the tools and am pretty handy with machining, I'm toying with the idea of just getting an 80% .308 lower and build my own DPMS-style AR-10 from scratch. No FFL required, no muss, no fuss. It's not so much that I want to save money, but I've got rather finicky requirements that aren't met by any of the affordable .308 platforms out there.

Best,
Ritz is offline  
Old December 29, 2013, 03:29 PM   #7
Damon555
Senior Member
 
Join Date: January 11, 2012
Posts: 137
The best advice I can give is that you build something without a bunch of "extras" that you don't really need. Rails, lights, lasers, fancy grips and fully adjustable stocks are all well and good but you don't need them. The basic design of the rifle is about as good as it can get.....sure you can add a few things here or there but until you know what the original version was designed to do it's tough to make a decision about something that just looks different or cool.

But if you do it yourself just make sure you do it right....If you're not comfortable with it then just order something already put together.

Last edited by Damon555; December 29, 2013 at 03:36 PM.
Damon555 is offline  
Old December 29, 2013, 03:42 PM   #8
Jimro
Senior Member
 
Join Date: October 18, 2006
Posts: 5,676
Famas,

In a nutshell, no. If you want to ensure everything is good, buy a barrel assembly with a matching bolt already checked for headspace. I didn't bother with that step for the last two builds.

Jimro
__________________
"Gorsh" said Goofy as secondary explosions racked the beaten zone, "Did I do that?"

http://randomthoughtsandguns.blogspot.com/
Jimro is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07018 seconds with 7 queries