The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old March 14, 2009, 08:24 PM   #1
Wrothgar
Junior member
 
Join Date: January 28, 2009
Location: Colorado
Posts: 778
Stevens/Savage model 620 12 gauge

I just got my dad's old one that was given to him by my grandfather. It probably hasn't been shot since before I was born and REALLY needs a tear down and oil. Anyone know where I can find out how to take one of these apart? Also, are they valuable or were they spam?
Wrothgar is offline  
Old March 14, 2009, 09:50 PM   #2
.45 COLT
Senior Member
 
Join Date: May 18, 2004
Posts: 308
I don't know about where you can get a detailed description of the strip procedure, but this diagram might help:

http://stevespages.com/ipb-stevens-520-620.html

DC
.45 COLT is offline  
Old March 15, 2009, 02:35 PM   #3
Lee Lapin
Senior Member
 
Join Date: September 7, 2004
Location: SE NC
Posts: 1,238
Wrothgar,

No, it's not particularly valuable- just a plain working man's pumpgun from years gone by. But it's a family heirloom, and for that reason alone you should value it highly and treat it with respect. It's a very robust design, and both the 520 and the 620 saw service as trench guns and riot guns in the US military.

The 620 is an evolution of the Stevens 520, which is essentially the same mechanical design. The 620 was a slave to fashion though, with its streamlined receiver. The 520 had the typical hump-back receiver profile that was a sort of trademark of its designer- someone no one here ever heard of before- John Moses Browning 8^).

Browning filed for the patent on what became the Stevens 520 on July 19, 1903, and sold the manufacturing rights to Stevens. The first 520 came on the market early in 1904. It had an odd double-hump receiver, and looked sort of like the receiver profile of the BAR, minus the rear sight.

Savage bought out Stevens in 1920. Tastes in shotguns had shifted to favor the streamlined look of the Remington Model 10 and the Winchester Model 12, so in 1927 Savage/Stevens introduced the Model 620. Mechanically it was the same as the old 520, but the receiver displayed the now popular streamlined look.

The 520/620 is a takedown design- the best such design IMHO ever available in US repeating shotgun history, except perhaps for the Burgess Folding Police Gun upon which it was based. To take it down:

1) Clear the gun to make sure both magazine and chamber are unloaded. Hammer should be cocked, and safey ON.

2) Open the bolt fully to the rear.

3) Grasp the ribbed section of the magazine tube and turn it clockwise (as viewed from the rear). As you turn the magazine tube, note that the keyed magazine tube base retracts forward, away from the receiver.

4) With the magazine tube base all the way forward, push down on top of the barrel's chamber while pushing up on the bottom of the receiver with the other hand. The barrel assembly should move freely down in the receiver about 1/4" until stopped by the action bar contacting the inside of the receiver. At this point the action bar will be separated from the bolt.

5) Withdraw the forearm forward until the action bar comes all the way out of the receiver.

6) Resume pushing straight down on the top of the chamber and straight up on the bottom of the receiver, being careful not to drop either half of the shotgun. The two parts should separate easily. While separated, be careful not to damage the ridges on the barrel assembly.

Reassemble carefully in reverse order.

That should be enough for normal cleaning. I would remind you again- this is a Browning design. That means LOTS of little fiddly bits best left in place in the gun.

IF you need to go further, I suggest you simply remove the buttstock from the receiver (take the buttstock mounting bolt out of the receiver tang, using a properly fitted screwdriver, then pull the buttstock off the tangs to the rear) and soak the entire receiver assembly in kerosene or diesel fuel for a few hours, using a safe (not glass) covered container in a properly ventilated place not exposed to fire or open flames. Then let it drain safely under the same conditions, changing its orientation from time to time until the residual liquid has all drained out, and relubricate sparingly. Then replace the buttstock.

The barrel/magazine/forearm assembly comes apart easily. Just remove the single machine screw holding the magazine end piece to the lug on the underside of the barrel- again, please use a properly fitted screwdriver. Be careful, because the magazine spring is under pressure behind the magazine end piece and if you let it get away from you, the magazine end piece will go flying. It'll be pretty obvious how it all comes apart and goes back together at that point.

Be good to this gun, don't get any weird ideas about detail stripping it, or refinshing anything. It has honest wear, put there by long use in the hands that were responsible for you being in this world- leave all that in place, please. That's all part of your heritage. Preserve it so you can pass it on to future generations without bunged up screw heads or other signs of kitchen table gun butchery. There's enough of that out there now as it is without adding more.

Enjoy it, it's a great gun, and you'll never get another one with this gun's history.

lpl
Lee Lapin is offline  
Old March 15, 2009, 03:30 PM   #4
Wrothgar
Junior member
 
Join Date: January 28, 2009
Location: Colorado
Posts: 778
Wow, uh, thanks Lee. The only real story I have is that it almost killed my dad - he leaned it up against a tree, it fell over and went off :-).

Edit: Here is a not so great picture of it (I would take them outside to take pics but, while I'm allowed to have guns here, I don't want to go around showing them off).


Last edited by Wrothgar; March 15, 2009 at 11:25 PM.
Wrothgar is offline  
Old March 16, 2009, 12:02 AM   #5
Wrothgar
Junior member
 
Join Date: January 28, 2009
Location: Colorado
Posts: 778
Okay, so the question is: can I shoot it? Its probably at least 50 years old - would modern loads be too much for it?
Wrothgar is offline  
Old March 16, 2009, 12:53 PM   #6
Lee Lapin
Senior Member
 
Join Date: September 7, 2004
Location: SE NC
Posts: 1,238
There shouldn't be any problems at all in shooting it, with loads that will chamber properly. A 620 should have a 2 3/4" chamber, and it should be clearly marked on the left side of the barrel over the chamber area. Assuming everything functions properly, it's fine to shoot. Fifty is pretty young for a gun 8^).

One note- 520s and 620s don't have disconnectors and WILL slam fire if the action is closed briskly on a live round when the trigger is held back with the safety off. Some people do it for fun, but it's hard to hit anything that way and turning ammo into noise with nothing gained thereby is an increasingly expensive pastime these days. The older Ithaca 37s, Win Model 97 and Model 12s will do it also, it's a characteristic of the older designs. It won't hurt the gun but it makes about as much sense as smoking the tires on your car on purpose. And it's definitely something you should know about the gun before you start stuffing live ammo in it. It'll definitely give you a lesson in Rule #3 if you don't observe it carefully.

hth,

lpl

Last edited by Lee Lapin; March 16, 2009 at 12:58 PM.
Lee Lapin is offline  
Old March 16, 2009, 07:51 PM   #7
Wrothgar
Junior member
 
Join Date: January 28, 2009
Location: Colorado
Posts: 778
Oh, and I got it dismantled and clean - for sitting in the closet for many years it looks like it is in great shape!
Wrothgar is offline  
Old January 30, 2010, 12:17 AM   #8
Wrothgar
Junior member
 
Join Date: January 28, 2009
Location: Colorado
Posts: 778
Alright, another random question:

Do you guys know anything about reading the numbers or have a link to a place that would explain them for me? Something like the year made or where the numbers are? I can't find them, although they're probably staring me in the face.
Wrothgar is offline  
Old April 8, 2010, 12:26 AM   #9
JonintheRedZ28
Junior Member
 
Join Date: April 8, 2010
Posts: 1
I apologize for being slightly off topic, but I must thank you, Lee, for the detailed takedown information. It really helped, I just found my grandfather's old US-marked 620 (navy, WWII, so I'm told) and your information was very helpful to me. As for the poster, your 620 looks a lot better than mine. lol.
JonintheRedZ28 is offline  
Old August 2, 2010, 02:28 AM   #10
Savage620
Junior Member
 
Join Date: August 2, 2010
Posts: 1
I have a savage 620 also and I took the screws out on the side too which was a hug mistake. The thing that makes the shells hop up came loose i put it back together and it is back in the correct position but for some reason it is to high on the inside and the reloading shell action doesn't not work it will not take a shell from the tube to the barrel. any help?
Savage620 is offline  
Old December 5, 2013, 06:10 AM   #11
Donttreadonme
Junior Member
 
Join Date: July 16, 2009
Location: York County, PA
Posts: 5
Dug this thread up while looking for info on an old shotgun I lucked into (free). Just wanted to thank Lee for his very informative post. What a great design thiese old gems were!
Donttreadonme is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10322 seconds with 9 queries