The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 3, 2013, 06:09 AM   #1
mcgee10
Junior Member
 
Join Date: September 24, 2013
Posts: 9
Adjusting open sights

My rifle has a step rear sight for adjustment up and down.
I'm shooting a little low and would like to move the sight. I have read many posts and some say move it backwards and some say frontwards well what it it.
Can anyone here help me.
I spend most of my time here reading and learning from other posters here and I have learned a lot.
I'm a open sight shooter, I think using a scope it like shooting your target from 30 feet away. Not much sport in that, and that's just my feeling.
I don't care if you use a scope or not I was just telling you how I go.
The older I get the harder it is for me to see open sight.
I just retired my Marlin 44 mag and replaced it with a Henry Big Boy 44 mag, but I need a little help getting my line of fire up 1 inch.
I have has a golden boy 22 for a few years and it shot dead center right out of the box.
Thanks in advance.
mcgee10 is offline  
Old October 3, 2013, 06:47 AM   #2
RodTheWrench
Senior Member
 
Join Date: April 24, 2013
Location: Utah
Posts: 259
You don't specify the distance at which you are an inch low, but if you want your point of impact to come up, move the rear sight up one notch (up as in up away from the barrel).

If you're only an inch low at 50 yards, I'd just modify the sight picture a skosh instead of messing with physical adjustments, but that's just me.

HTH,

Rod
__________________
.
"It's you and me against the world."
"So, when do we attack?"
RodTheWrench is offline  
Old October 3, 2013, 02:18 PM   #3
mcgee10
Junior Member
 
Join Date: September 24, 2013
Posts: 9
1 inch to 1 1/2 inches low at 100 yrds at the gun range. Thanks I get it now.
mcgee10 is offline  
Old October 3, 2013, 02:57 PM   #4
45_auto
Senior Member
 
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 608
Figuring an 18" sight radius on your Henry, that means you will need to raise the rear sight .005" (five thousandths of an inch) to make the point of impact 1" higher at 100 yards.

A human hair or a piece of paper is typically about .003" (three thousandths of an inch) as a point of reference.
45_auto is offline  
Old October 3, 2013, 04:44 PM   #5
mcgee10
Junior Member
 
Join Date: September 24, 2013
Posts: 9
So with no adjustment being able to be made without a dial indicater on my rear blade this will be harder than I thought.
mcgee10 is offline  
Old October 4, 2013, 07:16 AM   #6
cecILL
Senior Member
 
Join Date: August 13, 2001
Location: central IL
Posts: 484
You're overthinking this, just move it and see what happens.
cecILL is offline  
Old October 4, 2013, 02:46 PM   #7
Roughedge
Senior Member
 
Join Date: January 24, 2011
Location: Monroe,NC
Posts: 348
What they are trying to say is unless you have very fine adjustment on your sight its not worth moving them. If you raise the rear sight up a notch most likely it will shot high so you will have to aim low . 1 to 11/2 is not bad for iron sight at 100 yds.
__________________
The man that die's with the most stuff win's!
Roughedge is offline  
Old October 5, 2013, 05:37 AM   #8
mcgee10
Junior Member
 
Join Date: September 24, 2013
Posts: 9
Thanks everyone.
Moved it over once and up once dam near perfect. At 100 yards most all the shots are in a tennis ball radius and after 200 shots the circle was about removed.
mcgee10 is offline  
Old October 5, 2013, 07:46 AM   #9
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,505
Quote:
At 100 yards most all the shots are in a tennis ball radius and after 200 shots the circle was about removed.
You may be able to shrink that 100 yard group-size somewhat by testing to see how different brands and styles of ammo shoot in your gun. Almost always it has been found that the best accuracy will come from a particular ammo. In the old days, we bought one box (50 rounds) each of each brand of standard velocity .22 ammo until we found what the gun liked. In those days, standard velocity L.R. ammo was generally available from each maker (as well as "High Velocity"), and was always cheaper. Nowadays that is not the case. They will offer "high Velocity" and "Target", with the "Target" likely being the "Standard Velocity" albeit at a higher price.
__________________
Sometimes you get what you pay for, sometimes you only pay more for what you get.
Three shots are not a "group"...they are a "few".

If the Bible is the literal, infallible, unerring word of God...where are all those witches I am supposed to kill?
dahermit is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08031 seconds with 7 queries