The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 25, 2013, 06:00 AM   #1
wileybelch
Member
 
Join Date: May 16, 2009
Posts: 47
Cleaning rod preferences/experience?

I would like some comments on cleaning rod preferences and experiences, both pros and cons. I have been using Parker-Hale rods for decades and recently acquired a Dewey in .22. The Dewey quickly began to flake off the plastic? coating and now there is a bare metal section just to the rear of the jag. The Parker-Hale design has withstood countless cleaning sessions with no significant deterioration. The Dewey rod with its black coating makes it impossible to see accumulating debris during multiple swipes with a brush. The pale yellow or gray PH rods make dirty solvent easily detected. Anybody recommend other brands of cleaning rods?? With pros and cons.
Thanks for comments in advance!
wileybelch is offline  
Old August 25, 2013, 06:24 AM   #2
krimmie
Senior Member
 
Join Date: February 11, 2007
Location: S. Florida
Posts: 175
Cleaning rod preferences/experience?

My newest rod is a Birchwood Casey that's probably 10 years old; the others I use are unmarked and over 40 years old...all of them are holding up fine though.
krimmie is offline  
Old August 25, 2013, 07:04 AM   #3
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,531
I have made several of my own using drill rod which is annealed tool steel, to avoid using aluminum rods (aluminum + oxygen = aluminum oxide, an abrasive used in sandpaper.) The drill rods come in 36" lengths. The handles can be made by epoxying file tang handles on them. You need a lathe though, to drill and tap a hole for standard brass brushes and slotted tips, and other accessories.
Some folks are of the opinion that coated rods can/will become embedded with hard particles that will abrade the barrel.
__________________
Sometimes you get what you pay for, sometimes you only pay more for what you get.
Three shots are not a "group"...they are a "few".

If the Bible is the literal, infallible, unerring word of God...where are all those witches I am supposed to kill?

Last edited by dahermit; August 25, 2013 at 08:25 AM.
dahermit is offline  
Old August 25, 2013, 08:03 AM   #4
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 17,045
One piece coated Dewey rod for precision equipment.

Outers sectional brass rod for home cleaning.

Solid one piece brass range rods for muzzle loading.

Bore snake for field (compact and light).
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old August 25, 2013, 05:59 PM   #5
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,843
The coated rods are falling out of favor because of the shaving and flaking problem.
Most shooters today are using one-piece bare hardened stainless steel rods or the new carbon fiber rods.

Dewey stainless is about as good as it gets.
Dfariswheel is offline  
Old August 27, 2013, 06:12 AM   #6
Bart B.
Senior Member
 
Join Date: February 15, 2009
Posts: 5,385
If one uses a proper cleaning rod guide in the receiver, coated rods will not have their coating scraped off. A "must" thing to do with rimfire 22's if one wants to maintain their barrel quality. Guides help with centerfire rifles, too.

Bare metal cleaning rods made with stuff softer than stainless steel allow abrasive grit to get imbedded in them; that wears away barrel steel. Such metals include aluminum and brass.
__________________
US Navy Distinguished Marksman Badge 153
Former US Navy & Palma Rifle Team Member
NRA High Power Master & Long Range High Master
NRA Smallbore Prone Master
Bart B. is offline  
Reply

Tags
rhb

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09200 seconds with 7 queries